The mud truck model generally uses a 5-square, 10 square, and 15 square mud hook arm truck for registration without overloading

Description :

　　The mud truck model generally uses a 5-square, 10 square, and 15 square mud hook arm truck for registration without overloading

　　The characteristic of the hook arm sludge truck is that one truck can be equipped with multiple sludge and garbage bins, which can end the combined cycle operation and transportation of one truck and multiple sludge bins, fully improving the transportation capacity of the vehicle. The whole vehicle has the benefits of simple structure, convenient operation, high loading and unloading efficiency, high degree of mechanical automation, and labor-saving. The pull arm system can freely drop the box to the ground for garbage loading, and then smoothly lift the box from the ground to the vehicle. The box is locked by the pull arm installation system to end the entire process of transportation, lifting, and unloading. This vehicle is widely used for transporting various types of garbage, manure, and sludge, avoiding secondary pollution and having good environmental friendliness.

　　Characteristics of hook arm sludge truck and operating method for loading and unloading the cargo body:

　　Lift the trash can from the ground:

　　(1) Park the vehicle about 3 meters in front of the box.

　　(2) Open the power take-off. The control button inside the driver's cabin controls the power take-off switch.

　　(3) Push the hydraulic box locking device to the recovery position through the operating handle.

　　(4) Flip the lifting arm so that the hook can pierce under the lifting ring of the box. The mud truck model generally uses a 5-square, 10 square, and 15 square mud hook arm truck for registration without overloading

　　(5) Gradually reverse the vehicle backwards (until the hook is connected to the box lifting ring), and if necessary, adjust the height of the hook to ensure it is in position.

　　(6) Lift the box up and down by controlling the lifting arm. Accurately control the multi way valve to ensure that the action is as smooth as possible. When the lifting arm reaches the horizontal position, that is, when the box smoothly falls onto the subframe, the operating handle returns to the center position and stops the operation.

　　(7) Advocate hydraulic box locking equipment. Securely lock the box and chassis.

　　(8) Closed power take-off.

　　Hook arm construction waste, sludge, and feces transport vehicles: The mud truck model is generally 5 cubic meters, 10 cubic meters, and 15 cubic meters. The sludge hook arm truck is registered without overloading

　　Detachable transport sludge truck - environmental sanitation garbage truck, hydraulic cylinder lifting and unloading of the box body, hydraulic cylinder opening and locking of the rear cover (sealed with corrosion-resistant silicone sealing strip at the discharge port), and opening of the wingspan on both sides of the top cover. The docking loading method of the box type sludge transport vehicle is suitable for various loading methods such as loader loading and manual loading.

　　Dongzheng Special Vehicle Co., Ltd. firmly believes that "because of dedication, it is trustworthy. We will give back to our customers for their trust and support in our company with excellent products, discounted prices, and zero distance service!

　　The mud truck model generally uses a 5-square, 10 square, and 15 square mud hook arm truck for registration without overloading

AfterSalesService :

• 5 cubic meters
• 10 cubic meters
• and 15 cubic meters of sludge hook arm truck