Announcement of complete procedures - manufacturer/price/configuration/model of biogas slurry transport vehicle

Description :

　　Announcement of complete procedures - manufacturer/price/configuration/model of biogas slurry transport vehicle

　　The biogas slurry and manure transport vehicle is a tank type vehicle that collects and transports livestock and poultry manure, domestic manure water, and farm biogas slurry to avoid secondary pollution. It can self suction and discharge, has fast environmental protection work speed, and is easy to transport. The rear tank door can be automatically opened by hydraulic pressure, which is convenient for cleaning the sediment inside the tank. It is suitable for collecting and transporting manure, biogas slurry, manure, etc... The tank capacity includes models such as 2.8 cubic meters, 3 cubic meters, 4 cubic meters, 5 cubic meters, 6 cubic meters, 8 cubic meters, 10 cubic meters, 12 cubic meters, and 15 cubic meters. During the transportation of livestock and poultry manure by ordinary vehicles, the poor sealing of the vehicles often leads to phenomena such as sludge dripping and leaking, which can cause repeated environmental pollution. With the demand for maintaining urban environment and the upgrading of specialized vehicles, the newly developed livestock and poultry manure transport vehicles by manufacturers effectively solve the dilemma of environmental protection transportation. Announcement of complete procedures - manufacturer/price/configuration/model of biogas slurry transport vehicle

　　The fecal suction truck is equipped with a vacuum suction pump, which can self suction and discharge, and is widely used for suctioning feces, sewage, biogas slurry water, and liquids mixed with small suspended solids. A specialized vehicle suitable for cleaning and dredging work in environments such as breeding farms, municipal sanitation, vehicles of all sizes, residential areas, schools, septic tank cleaning and transportation, factory sludge, sewage ditches, and sewers. Quotation for 3 tons, 5 tons, 8 tons, and 10 tons of sludge and feces truck with fecal tank

　　The suction truck tank body adopts one-time molding and grinding technology, with a straight and full weld seam, CT detection, no bubbles, no broken welds, and no nodules. After the tank body is formed, high-pressure gas leak testing and shot blasting pretreatment process are used to achieve rust removal and rust prevention. A wave proof partition is installed inside the tank body, making it have the characteristics of high strength, stable center of gravity, and safe and stable vehicle transportation. Install anti overflow devices to prevent feces and sewage from being filled and poured back into the vacuum pump system. The paint is coated with car metal paint, which has a more stylish and beautiful appearance, and a longer rust prevention time. Announcement of complete procedures - manufacturer/price/configuration/model of biogas slurry transport vehicle

　　What's the reason why the suction truck hasn't been able to suck for many years? The sanitation truck manufacturer tells you to check the following places:

　　1. To inspect the suction pipe of the car, first draw a can of water and check if there are any cracks or fissures in the suction pipe during the suction process. Then, check if the joint under supervision is not tightly wrapped.

　　2. Check if the leather ring of the rear cover of the suction truck has corroded? Is the discharge valve on the suction tail tilted or has a problem with the leather pad?

　　3. Check if the tank has rusted through or if there are any cracks caused by collision.

　　We will first check all the above reasons. If there are no problems, we will remove the screws of the pump. After removing the pump casing, we will check whether the pump blades inside are deformed or scratched. If there are any, we will replace them. A small number of pump blades are made of iron, mostly composite products, which look like plastic plates. If there are no problems with the pump blades, we will consider replacing them, which can save unnecessary economic expenses.

　　Fecal and sewage suction truck: operation process

　　(1). Draw the fecal suction hose as deep as possible into the fecal liquid, and keep the end of the hose below 300mm from the liquid level during operation.

　　(2). Push the handle of the four-way valve perpendicular to the ground.

　　(3). Shift the transmission to neutral, then start the engine, disengage the clutch, pull the power take-off switch backwards to shift the power take-off, and the vacuum pump starts running.

　　(4) Open the toolbox inside the cab, pull out the buzzer switch, and turn on its power.

　　(5) Operators should pay attention to monitoring the situation near the inlet of the fecal suction hose and use appropriate tools to block debris to prevent blockage.

　　(6) The operator can use the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the driver should be notified and colleagues should quickly pull the suction hose off the ground or close the four-way valve. Under normal circumstances, the buzzer will emit sound and light signals. When the driver receives the signal, they should reduce the throttle, shift the power take-off switch forward out of gear, stop the vacuum pump, press the buzzer switch, and cut off its power supply.

　　(7) Close the fuel tank by aligning the straight plug handle plate with the axis of the inlet box. (8) After flushing the hose, put it back into the platform box, close the side door, and make the suspension rod face above the cab.

　　(8) Close the anti overflow valve so that its handle is perpendicular to the road axis.

　　(9) Drive the fecal suction truck and sewage suction truck away from the work site.

　　Announcement of complete procedures - manufacturer/price/configuration/model of biogas slurry transport vehicle

AfterSalesService :

• Manufacturer of biogas slurry transport vehicles