3 tons, 4 tons, 5 tons of sewage and manure tank transport vehicle, 13 tons, 14 tons, 15 tons, mass production

Description :

　　3 tons, 4 tons, 5 tons of sewage and manure tank transport vehicle, 13 tons, 14 tons, 15 tons, mass production

　　The biogas slurry and manure transport vehicle is a tank type vehicle that collects and transports livestock and poultry manure, domestic manure water, and farm biogas slurry to avoid secondary pollution. It can self suction and discharge, has fast environmental protection work speed, and is easy to transport. The rear tank door can be automatically opened by hydraulic pressure, which is convenient for cleaning the sediment inside the tank. It is suitable for collecting and transporting manure, biogas slurry, manure, etc... 3 tons, 4 tons, 5 tons of sewage and manure tank transport vehicle, 13 tons, 14 tons, 15 tons, mass production

　　The fecal suction truck is equipped with a vacuum suction pump, which can self suction and discharge, and is widely used for suctioning feces, sewage, biogas slurry water, and liquids mixed with small suspended solids. A specialized vehicle suitable for cleaning and dredging work in environments such as breeding farms, municipal sanitation, vehicles of all sizes, residential areas, schools, septic tank cleaning and transportation, factory sludge, sewage ditches, and sewers. 3 tons, 4 tons, 5 tons of sewage and manure tank transport vehicle, 13 tons, 14 tons, 15 tons, mass production

　　The tank capacity includes models such as 2.8 cubic meters, 3 cubic meters, 4 cubic meters, 5 cubic meters, 6 cubic meters, 8 cubic meters, 10 cubic meters, 12 cubic meters, and 15 cubic meters. During the transportation of livestock and poultry manure by ordinary vehicles, the poor sealing of the vehicles often leads to phenomena such as sludge dripping and leaking, which can cause repeated environmental pollution. With the demand for maintaining urban environment and the upgrading of specialized vehicles, the newly developed livestock and poultry manure transport vehicles by manufacturers effectively solve the dilemma of environmental protection transportation. 3 tons, 4 tons, 5 tons of sewage and manure tank transport vehicle, 13 tons, 14 tons, 15 tons, mass production

　　Swamp liquid transport vehicle, abbreviated as suction truck. Introduction to suction truck: The engine selection is up to the user, and the tank is made of 5mm thick carbon steel plate with a large-diameter suction pump. It is equipped with a 6-7 meter suction pipe, ABS and car air conditioning, electric doors and windows, locks, and the body color can be selected by the user. The tank steel thickness is 5mm, equipped with Yifeng suction pump, with a sight window, suspension rod, discharge valve, vacuum pressure gauge, and hand washing water tank. The first party shall provide the registered invoice, chassis qualification certificate, vehicle qualification certificate, warranty manual, and various accompanying tools and other registration procedures. The vehicle shall be equipped with air conditioning according to the user's requirements, and the installation size and overall size shall comply with the standard announcement size. The vehicle appearance shall comply with the automobile announcement standard, and the advantage is that no purchase tax shall be paid. 3 tons, 4 tons, 5 tons of sewage and manure tank transport vehicle, 13 tons, 14 tons, 15 tons, mass production

　　Overloading a sewage suction truck can cause deformation of the chassis structure. When purchasing a sewage suction truck, the manufacturer usually produces it according to the national regulations and will not overload it unless it is modified without authorization. When purchasing a vehicle, it is necessary to refer to the size specified in the notice; When purchasing a sewage truck, it is important not to look for cheap prices. You should know that you get what you pay for. Years of experience remind bosses to choose reputable manufacturers and experienced salespeople to consult and purchase, which can save a lot of unnecessary trouble, avoid detours and losses.

　　Fecal and sewage suction truck: operation process

　　(1). Draw the fecal suction hose as deep as possible into the fecal liquid, and keep the end of the hose below 300mm from the liquid level during operation.

　　(2). Push the handle of the four-way valve perpendicular to the ground.

　　(3). Shift the transmission to neutral, then start the engine, disengage the clutch, pull the power take-off switch backwards to shift the power take-off, and the vacuum pump starts running.

　　(4) Open the toolbox inside the cab, pull out the buzzer switch, and turn on its power.

　　(5) Operators should pay attention to monitoring the situation near the inlet of the fecal suction hose and use appropriate tools to block debris to prevent blockage.

　　(6) The operator can use the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the driver should be notified and colleagues should quickly pull the suction hose off the ground or close the four-way valve. Under normal circumstances, the buzzer will emit sound and light signals. When the driver receives the signal, they should reduce the throttle, shift the power take-off switch forward out of gear, stop the vacuum pump, press the buzzer switch, and cut off its power supply.

　　(7) Close the fuel tank by aligning the straight plug handle plate with the axis of the inlet box. (8) After flushing the hose, put it back into the platform box, close the side door, and make the suspension rod face above the cab.

　　(8) Close the anti overflow valve so that its handle is perpendicular to the road axis.

　　(9) Drive the fecal suction truck and sewage suction truck away from the work site.

　　3 tons, 4 tons, 5 tons of sewage and manure tank transport vehicle, 13 tons, 14 tons, 15 tons, mass production

AfterSalesService :

• Sewage and fecal water tank transport vehicle