Static level fully automatic static level can be OEM

Description :

　　The static level is generally installed on the measuring pier or the wall contour line of the measured object at the same height. Usually, the data is automatically collected and stored in the field acquisition system through the stand-alone acquisition software built in the field acquisition box. Then, it is connected to the Internet through wired or wireless communication and then transmitted to the background network software to achieve automatic observation.

　　Installation and layout of layered settlement meter

　　① Before installation, connect multiple single point settlement meters in series based on the number of layers.

　　② Adopt drilling and drilling methods for burial, with a diameter of Φ 108 or Φ 127.

　　③ Drill vertically, the depth of the hole should be consistent with the total length of the settlement meter, and the hole opening should be flat.

　　④ Before installation, grout at the bottom of the hole to secure the bottom anchor plate 1.

　　⑤ During installation, the bottom anchor plate 1 is located below and the flange settlement plate 2 is located above.

　　⑥ At the same time, use a drawstring to protect the components from falling off on their own.

　　⑦ Use rod 3 to press the bottom anchor plate 1 of the settlement meter to the design depth.

　　⑧ Fill with fine sand or soil until the flange plate 2 is connected to the layer.

　　⑨ Grout at the connection flange plate 2 of the layer.

　　Static level is a high-precision liquid level measurement system suitable for measuring relative settlement at multiple points. In use, multiple containers of static level are connected by liquid pipes, and the liquid level of each container is measured by relevant sensors, which can then measure the liquid level changes at each measuring point.

　　Characteristics of pressure differential static level: small size, high accuracy, and large range; It can be installed according to the ground trend without the need for turning points, and the fully sealed structure can be buried underground; Equipped with wide temperature compensation (-20~80 ℃), the working temperature can reach -40~125 ℃, suitable for various harsh environments; The measurement point does not require liquid level flow, as long as there is a liquid level pressure difference during settlement, it can be reflected in real time, and the data is more real-time; The hardware has RS485 interface, strong compatibility, and can be externally connected to Zigbee modules to achieve Zigbee self-organizing network. It can also be connected to an external GPRS module for remote communication.

AfterSalesService :

• Static level