Flat radar water level gauge, radar level gauge manufacturer, contact us for more information

Description :

　　In daily maintenance, the reflection wave curve can be remotely observed using a PC. For potential new interference waves that may occur later, the liquid level gauge can be used to identify false waves, eliminate the influence of these interference reflection waves, and ensure accurate measurement.

　　The measurement principle of radar level gauge is based on the Time Domain Reflectance (TDR) principle. The electromagnetic pulse of the radar level gauge propagates along the steel cable or probe at the speed of light. When it encounters the surface of the measured medium, some of the pulses of the radar level gauge are reflected to form a return wave and return to the pulse emitting device along the same path. The distance between the emitting device and the surface of the measured medium is proportional to the propagation time of the pulse between them, and the liquid level height is calculated.

　　When measuring the medium flow rate, instrument range, and caliber of a measurable medium, the full-scale flow rate of a radar level gauge can be selected within the range of 0.5-12m/s for measuring medium flow rate, which is relatively wide. The selection of instrument specifications (caliber) may not necessarily be the same as the process pipeline, and should be determined based on whether the measured flow range is within the flow rate range. That is, when the pipeline flow rate is too low to meet the requirements of the flow instrument or the measurement accuracy cannot be guaranteed at this flow rate, the instrument port diameter needs to be reduced to increase the flow rate inside the pipeline and obtain satisfactory measurement results.

AfterSalesService :

• Flat radar water level gauge