Water supply pressure sensor, pipeline network pressure transmitter
Category:
Instrumentation/transmitter /Pressure transmitter
Model:
HR3200
Brand:
Hengrui
Retail Price
99.00USD
重量
kg
- Product Description
-
Description :
HR3200Series of water supply pressure sensors, pipe network pressure transmitters
Overview of Water Supply Pressure Sensors, Pipeline Network Pressure Transmitters, and Products
HR3200 water supply pressure sensor pipe network pressure transmitter is a universal pressure measurement product suitable for multiple industries such as industry and civil use. It is designed with a stainless steel structure, precise and compact, and easy to install and use. Widely applicable in industries such as aerospace, petroleum, chemical, metallurgical, power, hydrology, etc., to achieve measurement and control of process pressure. This series of products adopts a fully stainless steel structure design, with various forms including flush film type, sanitary type, and anti-corrosion type. Multiple pressure interfaces and output signals can be selected, and can be adjusted on-site. It can display and has a protection level of IP65. It has reverse positive protection and instantaneous overcurrent protection, which meets the requirements of EMI electrical protection. Explosion proof products comply with the Exia Ⅱ CT6 requirements of GB3836.4 standard.
Main performance parameters of water supply pressure sensor, pipeline network pressure transmitter
Measurement medium: gas, liquid, oil can be compatible with the material of the contact part
Measurement range: -0.1... 0~0.01... 100MPa
Overload capacity: 1.5 times the range or 110MPa
Pressure type: gauge pressure, absolute pressure, or sealed reference pressure
Accuracy: Typical ± 0.25% FS, large ± 0.5% FS (including nonlinearity, hysteresis, and repeatability)
Long term stability: typical ± 0.1% FS/year; Greater ± 0.2% FS/year
Working temperature: -30 ℃~80 ℃; Explosion proof type: -10 ℃~60 ℃
Power supply: 15-30VDC (intrinsically safe type powered by safety barriers, calibrated voltage 24VDC)
Output signal: 4-20mA (two-wire) 0-10/20mA (three wire) 0/1-5/10V (three wire)
Load resistance: ≤ (U-15)/0.02 Ω ≤ (U-15)/0.02 Ω>5k
Media compatibility: Shell: Stainless steel 1Cr18Ni9Ti; Diaphragm: stainless steel 316L; O-ring: fluororubber or nitrile rubber
Protection level: IP65 (plug-in connection type), IP68 (cable connection type)
Selection guide for water supply pressure sensor, pipeline network pressure transmitter
HR3200
Forms of pressure
measurement range
code
output signal
structural material
code
process connection
code
Additional features
G (gauge pressure)
(0~x) kPa/MPa x: actual required range
I4
4~20mADC
code
Diaphragm/pressure interface
C1
M20 × 1.5 outer (water line sealed)
B1
4-core connector for output connection
A (absolute pressure)
I2
0~10mADC
twenty-two
Stainless steel 316L/stainless steel
C2
M20 × 1.5 outer (end face sealed)
B2
Cable connection output (1.5m long)
I3
0~20mADC
twenty-three
Stainless steel 316L/Stainless steel 316L
C3
G1
B3
7-core connector for output connection
U1
1~5VDC
twenty-five
Tantalum/Stainless Steel
C4
G1
P1
Flat membrane
U2
0~5VDC
thirty-five
Tantalum/Hastelloy C
Y
User Agreement (specify)
P2
Clamp type connection (DN26)
U3
0~10VDC
Y
User Agreement (specify)
M2
LED digital display
Y
User Agreement (specify)
M3
LCD digital display
Y
User Agreement (specify)
HR3200
G
0~1.6MPa
I4
twenty-two
C3
B1-P1 Selection Guide
AfterSalesService :
Key words:- Water supply pressure sensor pipe network pressure changes
More Products
