Full wind RB-92S-4 pipeline high-pressure blower 25Kw vortex high-pressure blower vacuum pump

Description :

Full wind RB-92S-4 pipeline high-pressure blower 25Kw vortex high-pressure blower vacuum pump

Vortex high-pressure blower, annular blower, vortex blower, high air pressure, through type fan, multi-stage blower, straight blade fan, high temperature resistant fan, explosion-proof blower, cooling fan, multi wing centrifugal fan, high-pressure blower, vortex high-pressure pump, vortex air pump, fan sample, mechanical structure of high-pressure blower:

　　Motor: Made according to European CE specifications. Standard: CRELEC high-voltage blower uses IP54F insulated two pole motor to directly drive

　　Oil seal: Use maintenance free shaft seals to separate the motor and blower body

　　Shell: The blower and motor shells are cast separately

　　Silencer: Both the exhaust and intake pipes are equipped with silencers to reduce noise. The standard voltage is 220/380 VOLTS. If different voltages are required, our company can also provide them

This product has passed the European CE certification and CCC certification, and does not require any modifications. After testing, it can be used in Europe, America, Asia, and other regions!

High pressure fan, high-pressure blower, vacuum vortex air pump specifications:

Power: 0.18 KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW 3.8KW 4KW 5.5KW 7.5KW 8.5KW 9KW

11KW 12.5KW 13KW 15KW 16.5KW 18.5KW 20KW 25KW 30KW

High temperature resistant type: 0.4KW 0.75KW 1.5KW 2.2KW 3.7KW 4KW 5.5KW 7.5KW 11KW 15KW 18.5KW

Single phase voltage: 0.12KW 0.18KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW

Wind pressure: 50mbar-1040mbar (positive pressure: 8KPA-104KPA) (negative pressure: 8KPA-73KPA) (for the convenience of selecting different specifications, single-stage/two-stage models are available)

Airflow: 40m3/h-3000m3/h (for the convenience of selecting different specifications, both single-stage and two-stage models are available)

Frequency: 50HZ/60HZ

Voltage: 110V-200V-220V-280V-380V-400V-415V-440V-600-615V (universal voltage, applicable to all countries). If special voltage is required, it can be customized according to requirements

Pressure relief valve: RV-01 RV-02 (for use with)

Filter: MF08 MF10 MF12 MF16 MF20 MF32

RB-92S-4 Double Impeller High Pressure Fan Vortex Blower High Pressure Vortex Air Pump Full Wind Vortex Fan

Special high-pressure fans: explosion-proof high-pressure fans, variable frequency high-pressure fans, corrosion-resistant high-pressure fans, DC high-pressure fans, high-temperature resistant high-pressure fans, fully sealed high-pressure fans, pump heads without motors (i.e. drag pumps), or combination air pumps of two of them, to meet different application scenarios and working conditions of customers.

4、 Advantages of high-pressure fan

1. Dual function of blowing and suction, one machine can be used for vacuum adsorption, blowing and conveying, as well as closed circuit air circulation, etc.

2. Oil free operation, the output air is clean, because the fan relies on the input of electricity to operate, and there are no oily components inside, so there is no need to worry about air pollution during transportation, and no impurities will be produced.

3. High pressure and power, compared to centrifugal fans and medium pressure fans, its pressure is much higher, which determines the pressure problem that other fans cannot meet. Moreover, it has a small size, low sound, and will not cause noise pollution.

4. The pump body is integrally cast using a hydraulic press and equipped with shockproof mounting feet. Therefore, its requirements for the installation foundation are also very low, and it can even operate normally without fixing the feet.

AfterSalesService :

• Vortex high-pressure blower