Ring high-pressure blower RB-750 750W blower manufacturer turbine vortex aerator fan windmill

Description :

Ring high-pressure blower RB-750 750W blower manufacturer turbine vortex aerator fan windmill

High temperature gas extraction fanUsage characteristics:

　　1. Equipped with dual functions of blowing and suction, this machine can be used for both suction and blowing purposes

　　2. Medium pressure, high air volume, low noise, lightweight

　　3. Using aluminum alloy material, significantly reducing weight and achieving the goal of lightweighting

　　4. The motor is designed as an I.E.C. (1HP or above) fully enclosed external fan aluminum frame motor with a special axis design, suitable for long-term use.

　　5. Special blade design, high pressure, large air volume, low noise, long lifespan.

　　6. Special air volume control damper, with high stability in air volume control and easy operation.

　　7. Eight characteristics can be modified: (vertical, horizontal, heat-insulating, DC, explosion-proof, anti-corrosion, waterproof, belt drive);

　　8. The machine has a complete range of types, and the air outlet can be adjusted to any direction according to actual requirements. There is a large inventory and fast delivery.

　　Note: Special models: can be manufactured and put into production according to samples, or customized non-standard products can be made according to customer requirements High temperature resistant suction and supply fans can be customized; High temperature resistant fan 80 degrees, high temperature resistant fan 100 degrees, high temperature resistant fan 120 degrees, high temperature resistant fan 150 degrees, high temperature resistant fan 180 degrees, high temperature resistant fan 200 degrees, high temperature resistant fan 250 degrees, high temperature resistant fan 300 degrees, high temperature resistant fan 350 degrees, high temperature resistant fan 400 degrees, high temperature resistant fan 500 degrees

high-pressure blowerOperation and maintenance:

After installation, the blower should be manually rotated before starting to check for any abnormal collisions or friction, whether the rotation direction of the motor is correct, and whether the inlet and outlet valves are in a low flow state.

2. During the operation of the fan, attention should be paid to whether there are any abnormal sounds, oil leaks, abnormal vibrations, high bearing temperature, excessive motor current, loose feet, or other abnormal phenomena inside the fan and motor, and they should be eliminated in a timely manner.

3. After 5000 hours of use, the bearing grease of the fresh air fan should be replaced.

4. Maintenance: When inspecting the casing, first loosen the screws on the horizontal split surface, open the upper half of the casing and the upper covers of the bearing boxes on both sides, and remove the rotor to repair the rotor or casing. During maintenance, special attention should be paid to whether the impeller blades are broken, whether there are cracks, and whether the main shaft is bent. Before installing and dismantling the machine casing, it is necessary to be careful to avoid damaging the rotor due to the swinging of the upper half of the casing during the installation and dismantling process.

5. During the shutdown period of the fan, the inlet and outlet of the fan should be covered properly to prevent debris from falling into the fan cavity and causing accidents.

6. The fan needs to be inspected every six months to remove dust and oil stains from the fan flow channel.

Installation precautions:

1. Installation location of high-pressure fan: It must be installed indoors in a place that is not affected by wind and rain

2. Environmental temperature: below 40 ℃

3. Relative humidity: below 80%

4. Air quality: If there are corrosive or flammable gases such as acids and alkalis in the air, they should not be transported by high-pressure blowers to avoid danger

5. Dust protection: Avoid using in places with large amounts of dust, powder, or fibers. If it is necessary to use in such places, please install a filter and regularly clean the dust attached to the filter and inside the high-pressure blower

6. Ventilation and heat dissipation: Please choose to use it in a well ventilated place and not in a sealed room or box

7. Placement space: For the convenience of column maintenance or repair, please avoid installing in overly narrow locations

8. Avoid vibration: Please install in a vibration free location; If the vibration in the venue is unavoidable, anti vibration measures must be installed to prevent the high-pressure blower from being damaged by external vibrations.

Ring high-pressure blower RB-750 750W blower manufacturer turbine vortex aerator fan windmill

AfterSalesService :

• Blower manufacturer