5.5KW Vortex High Pressure Fan RB-81D-2 Fan Cotton Quilt Packing Vacuum Fan

Description :

　　5.5KW Vortex High Pressure Fan RB-81D-2 Fan Cotton Quilt Packing Vacuum Fan

　　Vortex high-pressure fanProduct Introduction:

　　Also known as vortex air pump or high-pressure air pump, its working principle is to compress the ambient gas inside the fan and send it out through rotation. The internal design of the high-pressure blower is precise. Unlike centrifugal fans, high-pressure blowers have high pressure, generally ranging from 10Kpa to 100Kpa, but the flow rate is not as large as centrifugal fans, with a flow rate range of only 40m3/H-2100m3/H per hour.

　　Vortex high-pressure fanCharacteristic description:

　　1. It has dual functions of blowing and suction, and can be used for both blowing and blowing, similar to the function of a rotary vane vacuum pump;

　　2. Full wind brand fans have high precision, low noise, and oil-free operation, and the output air is clean;

　　3. Compared to other types of fans, such as full fan fans, their operating noise is lower, and the higher the power, the more obvious it will be. When the power is above 3KW, it will be displayed;

　　4. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;

　　5. The mechanical wear of high-pressure blowers is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal operating conditions, there is no problem for 3-5 years.

　　Vortex high-pressure fanUsage introduction:

　　Widely used in various industries such as industrial automation equipment, agricultural technology equipment, aquaculture aeration, environmental dust removal and suction, pipeline transportation, vacuum adsorption, printing and carving, sewage aeration, etc.

　　Usage standard:

　　The Quanfeng brand is easy to use and operate. The main precautions include voltage, frequency, and whether the medium gas and operating conditions are clean. If the environment is poor, filters and pressure relief valves can be used for protection.

　　Vortex high-pressure fanSelection method:

　　Due to the widespread use of vortex fans, their selection is also relatively complex. Generally speaking,

　　The following two steps need to be followed:

　　1. Need to determine what function of the high-pressure fan is used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure fan; If the curve is misread, sometimes the selected product cannot be used;

　　2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure fan model based on the working curve;

　　As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out. This needs to be done by designers or consulted with companies.

　　Structural characteristics of vortex turbine:

　　 ·The fan is mainly composed of components such as impeller, casing, air inlet, motor, connector, and cooling fan blades.

　　 ·The impeller adopts a multi blade single inlet centrifugal impeller, made of high-quality galvanized or cold-rolled steel plates, and the blades are designed based on aerodynamic principles. The WQE type impeller consists of 10 aft tilting airfoil blades, a curved front plate, and a flat rear plate. The material is made of high-quality steel plates with high strength and durability, and has undergone strict dynamic and static balance correction. It has good air performance, high efficiency, and smooth operation.

　　 ·The air inlet adopts a convergent streamlined vortex reduction form, which reduces airflow loss and improves the efficiency of the fan.

　　 ·The fan casing is connected to the motor through a metal casting, and the motor shaft head is equipped with a cooling fan blade. The outer wall of the metal casting has high inlet and outlet pipe interfaces to cool the metal casting and shaft head, ensuring that the motor operates normally at high temperatures.

　　 ·The motor adopts a special high-temperature motor, and the fluid part of the fan is made of heat-resistant materials, with reliable cooling structure performance. Compared to boiler induced draft fans, it has the advantages of simple structure, easy maintenance, and high cost-effectiveness.

　　5.5KW Vortex High Pressure Fan RB-81D-2 Fan Cotton Quilt Packing Vacuum Fan

AfterSalesService :

• Vortex high-pressure fan