MCJC-2200 pulse blowback dust collector 2.2KW wire drawing machine dust collector industrial dust collection device

Description :

　　MCJC-2200 pulse blowback dust collector 2.2KW wire drawing machine dust collector industrial dust collection device

　　Quanfeng Environmental Protection Technology Co., Ltd. (Shanghai, Jiangsu, Beijing, Dongguan, Suzhou) is a manufacturer of workshop dust treatment equipment and environmental dust collectors that integrates technology development, design, equipment manufacturing, on-site installation, and commissioning. The various industrial dust collectors and dust collector accessories series mainly produced are widely used in industries such as metallurgy, building materials, chemical industry, power, energy, food, machinery, etc. for flue gas purification, dust control, and material recovery.

　　Pulse dust collector is a new type of pulse dust collector improved on the basis of JC type. The purification efficiency is relatively high, the gas processing capacity is large, the performance is stable, the filter bag has a long service life, the operation is convenient, and the maintenance workload is small. Widely used in PCB factories, power plants, furniture factories, chemical factories, plastic factories, rubber factories, shipyards, food factories, foundries, electrical factories, etc.

　　Pulse blowback dust collectors mainly separate solids and air through filter media. Common industrial vacuum cleaners on the market generally have one or two filters. For example, the wet dry dual-purpose type uses a single weight filter element filter, while the dry industrial vacuum cleaner uses a dual filtration system of filter element and filter bag. The general filtration accuracy of the filter element is about 10 microns. By covering with film or using special materials, the accuracy can be reduced to less than 1 micron. The filter cloth is often made of non-woven fabric or polyester needle felt. Pulse dust collectors, when dusty gas enters the dust collector through the inlet, first touches the inclined plate and baffle in the middle of the inlet and outlet, and the airflow turns to flow into the ash hopper. At the same time, the airflow speed slows down. Due to inertia, coarse particles in the gas directly flow into the ash hopper. By using different manufacturing processes, the accuracy can be maintained at around 0.5 microns. At present, some enterprises have improved the filtration accuracy and air purification by modifying and increasing the number of stages of the filter medium. For example, our company generally adopts a two-stage or above filtration method, with three-stage filtration for dry powder and dual filtration for wet dry dual-use. By modifying and upgrading the filter medium, such as using high-efficiency filters (HTPE), the use of dust collectors can be expanded and the effectiveness can be greatly improved.

　　MCJC-2200 pulse blowback dust collector 2.2KW wire drawing machine dust collector industrial dust collection device

　　Pulse dust collectorComprehensive selection suggestions: 1. As a small hand grinder, flat grinder, tool grinder and other small grinding machines, if it is only fine grinding or dry grinding, it is recommended to use this vacuum cleaner. Firstly, it has low power, simple dust collection method, economy, environmental friendliness, and low noise.

　　2. As a larger precision grinder or inner and outer circular grinder, in addition to dehumidification grinding, consider using a 750W or higher power vacuum cleaner as much as possible, first considering the dust collection capacity and work efficiency, and single machine configuration.

　　3. If there is a combination of grinding fluid and workpiece during the precision grinding process, a 750W wet dry dual-purpose dust collector or a higher-level power vacuum cleaner must be selected. 4. Factors affecting the effectiveness of grinding machine vacuum cleaners: 1 Generally, in practical use, the suction power of industrial vacuum cleaners should be determined based on the weight and density of the waste being sucked in. When suctioning heavier particles, it is necessary to consider the diameter and length of the connecting pipe. The main factors that usually affect the suction effect are: too thick pipe diameter, too long pipe diameter, too low power of the suction fan itself, too many bends connected, and poor grading treatment! 3. Improper selection of the matching vacuum hood and improper design of the vacuum air outlet both affect the effectiveness of the vacuum cleaner. A commonly used equipment in industry, used for collecting waste, filtering and purifying air, and cleaning the environment during industrial production processes. Widely used in the textile and chemical industries, it can prevent the hazards of some occupational diseases.

　　Industrial dust collectorPrecautions for use:

　　During use, it should be managed by a dedicated person as much as possible. For first-time use, check whether the filter bag and filter element are installed properly, check the direction of the fan, and for those using belt transmission, check whether the belt has fallen off. After each use, try to clean the dust in the filter bag as much as possible to prevent moisture adhesion, which is not conducive to filtration and can easily damage the filter bag. Before use, check whether the filter bag and filter element are damaged. If they are damaged, the industrial vacuum cleaner should be replaced in a timely manner. It is strictly prohibited to use damaged filter bags and filters. If the suction force decreases during use, it is necessary to check whether the vacuum tube and suction head are blocked, whether the filter bag is too full, and whether there is too much dust on the surface of the filter element. Depending on the amount of dust, the bag and filter can be cleaned regularly or periodically. The bag can be regenerated by washing, and the filter can be shaken off by compressed air blowing back or gently tapping with hands.

AfterSalesService :

• Wire drawing machine dust collector