Full wind 4KW vacuum packaging suction vortex fan high-pressure blower vortex air pump manufacturer direct sales

Description :

　　Full wind 4KW vacuum packaging suction vortex fan high-pressure blower vortex air pump manufacturer direct sales

　　Vortex air pumpAdvantages:

　　1. Compact structure: Beautiful appearance, good stability, easy installation and maintenance.

　　2. Smooth operation: The optimized design of the impeller reduces the axial force to a very low level, and has an efficient impeller. After static and dynamic balance correction, the whole machine runs smoothly. Without any vibration reduction device, the bearing amplitude is ≤ 0.04mm.

　　3. Low noise: When the fan is running, there is no mechanical friction, and a reasonable blade shape is used to reduce the sound. The noise generated by the fan is high-frequency noise, and as long as there are obstacles, it can be soundproof, so there is almost no noise outside the fan room.

　　4. Oil free machinery: The fan bearings are lubricated with grease, and the bearing life is over three years. The fan does not produce oil or gas during operation. Special requirements for fans, using lubricated bearings.

　　5. Impeller: The impeller adopts a special composite linear design, which reduces internal leakage and improves volumetric efficiency.

　　6. Easy to adjust: The inlet butterfly valve adjusts the flow rate, and the outlet butterfly valve adjusts the pressure.

　　7. Driving method: Typically, a two pole asynchronous motor is used, but a four pole motor can also be used for driving. Depending on the user's power grid, motors with different voltages can be used.

　　8. Sealing: In addition to the inlet ring, each stage impeller is equipped with labyrinth seals between stages and at both ends of the casing to prevent gas leakage.

　　Vortex high-pressure air pumpSpecifications:

　　Power: 0.18KW 0.4KW 0.75KW 1.1KW 1.3KW 1.5KW 2.2KW 4KW 5.5KW 7.5KW 11KW 15KW 20KW 25KW

　　High temperature resistant type: 0.4KW 0.75KW 1.5KW 2.2KW 3.7KW 5.5KW 7.5KW 11KW 15KW

　　Single phase voltage: 0.2KW, 0.4KW, 0.55KW, 0.75KW, 0.85KW, 1.1KW, 1.3KW, 2.2KW

　　Wind pressure: 50mbar-1010mbar

　　Airflow: 40m3/h-3000m3/h (for the convenience of selecting different specifications, both single-stage and two-stage models are available in stock)

　　Frequency: 50HZ/60HZ Voltage: 110V-615V (universal voltage, applicable to all countries). If special voltage is required, it can be customized according to requirements

　　Pressure relief valve: RV-01 RV-02 (for use with)

　　Filter: MF08 MF10 MF12 MF16 MF20 MF32

　　high-pressure blowerDetection method:

　　1. Check the fastening condition of each part and whether there is any looseness in the positioning pin

　　2. There is no oil leakage inside the blower body

　　3. There should be no scaling, rusting, or peeling inside the blower body

　　4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter

　　5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally

　　6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components,

　　7. The oil tank of a new or overhauled blower should be cleaned and put into operation according to the usage steps. It is recommended to replace all lubricating oil after 8 hours of operation

　　8. A reasonable maintenance system should be formulated based on specific usage conditions, carried out on schedule, and recorded. It is recommended to conduct a major overhaul once a year and replace bearings and related vulnerable parts

　　9. It is recommended that the blower be overhauled by maintenance personnel

　　Full wind 4KW vacuum packaging suction vortex fan high-pressure blower vortex air pump manufacturer direct sales

AfterSalesService :

• high-pressure blower