RB-71D industrial vortex air pump, small vacuum high-pressure fan, dual purpose vortex air pump for exhaust, blowing and suction

Description :

　　The vortex air pump adopts the principle of bearing pre design,Two bearings are placed at the front end of the fan blades and the rear end of the motor to achieve dynamic balance and facilitate heat dissipation. (The reason is that the front end of the vortex air pump has heat dissipation fins for heat dissipation, while the bearings at the back end work under the built-in heat dissipation fan of the fan, thus keeping the bearings working for a long time at low temperatures.) The manufacturing process of the German Siemens fan specific motor for vortex high-pressure fans creates a luxurious configuration for you; Exclusive NSK/SKF bearings, with superior rigidity, are more suitable for long-term non-stop operation, and can be used on two domestically produced machines on top of one machine; The angled blade design allows us to have a larger airflow and higher wind pressure; Oxygenation Vortex Air Pump - With a wide range of power coverage and numerous machine base sizes, it is available for customers to choose from, including single-stage and multi-stage models. Customers can choose the model that is more suitable for their production and life according to their own needs. If inconvenient, they can also provide their production data to the sales staff for advice

　　High pressure vortex air pumpPerformance characteristics:

　　1. Low energy consumption:So any method such as blowing, spraying, and suction has its effectiveness, and it has a relatively conservative design in the high-pressure range. When the usage situation changes, the full fan can still operate safely.

　　2. Easy installation:Can be installed at any time in the place of use for compressed air or for vacuuming. And it can be installed in any horizontal or vertical direction.

　　3. High reliability:Apart from the impeller, there are no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, making it highly reliable and almost maintenance free.

　　4. Low vibration:The mechanical precision is high, and the other components of the rotating part have undergone extremely precise balance design, testing, and calibration, so the vibration rate is very low.

　　5. Space saving - sturdy designReduce space waste. Zui High Quality: With over 30 years of manufacturing experience and rigorous quality control, all parts meet Zui's high-quality requirements. To ensure performance, each fan undergoes operational testing before leaving the factory

　　high-pressure blowerDetection method:

　　1. Check the fastening condition of each part and whether there is any looseness in the positioning pin

　　2. There is no oil leakage inside the blower body

　　3. There should be no scaling, rusting, or peeling inside the blower body

　　4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter

　　5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally

　　6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components,

　　7. The oil tank of a new or overhauled blower should be cleaned and put into operation according to the usage steps. It is recommended to replace all lubricating oil after 8 hours of operation

　　8. A reasonable maintenance system should be formulated based on specific usage conditions, carried out on schedule, and recorded. It is recommended to conduct a major overhaul once a year and replace bearings and related vulnerable parts

　　9. It is recommended that the blower be overhauled by maintenance personnel

　　Full fan RB-71D-3 high-pressure fan 380V vortex cyclone pump industrial vacuum cleaner dedicated fan

AfterSalesService :

• high-pressure blower