Plastic Tray Shelves - Henan Liuwei

Description :

　　Based on the actual usage situation of users, pallet load requirements, pallet size, actual warehouse space, and actual lifting height of forklifts, we can design and customize crossbeam racks of different specifications for selection.

　　The crossbeam rack has the following characteristics:

　　1. The combination structure effectively prevents the instability of the shelves caused by loose bolts;

　　2. The cross-section of the column is composed of 13 folds, with a large inertia distance, strong bearing capacity, and strong impact resistance;

　　3. The shelf columns adopt automatic punching followed by cold bending forming technology, which avoids the possibility of cracking and failure of the columns due to stress concentration;

　　4. There are double drainage drip holes punched on the column, with a hole pitch of 50mm; therefore, the crossbeam hanging on the column can be adjusted up and down in units of 50mm;

　　5. The crossbeam is a buckle beam, which has the characteristics of light weight, strong bearing capacity, and low cost;

　　6. The crossbeam is welded together with two pendants and crossbeam rods, with a simple and safe structure;

　　7. Shelf surface treatment: spray coating.

　　The crossbeam of the shelf depends on the hook structure of the crossbeam and the way the crossbeam is hung to the column: it is better to have more hooks on the crossbeam, and the more force it can withstand, the better; The hanging of the crossbeam hook on the column depends on whether the contact between the hook and the column is tight and consistent. The inner side of the hook should be tightly connected to the side of the column without any gap, so that the structure can remain unchanged and withstand good force for durability.

AfterSalesService :

• Plastic pallet shelves