Suzhou P2 high brush LED display screen, supporting LCD display and wireless screen mirroring

Description :

　　Suzhou Q high brush LED display screen, P2 indoor full-color display screen with LCD display support technical parameters

　　LED is a type of current emitting device that emits light when current flows through it, and does not emit light when no current flows through it. The magnitude of the current flowing through it determines its luminous intensity. The different materials used in light-emitting diodes determine the color and intensity of the light emitted by the current flowing through them. Each color of LED is divided into three types based on its brightness: ordinary bright, high bright, and ultra-high brightness.

　　The quality of the chip directly determines the quality of the display screen. In order to ensure the quality of the display screen, Furui Lai Electronics has stable performance and quality chips.

　　LED screen is an array layout formed by arranging each pixel vertically and horizontally at a certain point spacing. Each light emitting diode in the LED screen has a corresponding brightness control circuit. The brightness and darkness of each light emitting diode in the LED screen form the desired image or text on the LED screen.

　　The entire display screen of Furui Lai Electronics is composed of unit modules, control circuits, switch power supplies, and outer frame steel structures, which are sturdy, durable, and aesthetically pleasing

　　Technical parameters of P2 outdoor full-color display screen body:

　　1) P2 three in one patch LED outdoor full-color display screen

　　2) Specification and model: 2mm dot matrix

　　3) Pixel density (dots/㎡): 250000 dots/㎡ (6mm)

　　4) Pixel composition: 1R+1G+1B

　　5) Input power ≤ 600W/㎡

　　6) Unit board specification: 160 points x 80 points, size 320mm x 160mm

　　7) Loss of control point<0.0001 (in a discrete state)

　　8) Display screen lifespan: over 100000 hours

　　9) Working environment temperature: -20 ℃ to+60 ℃

　　10) It has good maintainability and supports display modules with hot swapping

　　11) Full color screen white balance brightness ≥ 600cd/㎡

　　12) Perspective: Horizontal: ≥ 180o, Vertical: ≥ 180o

　　13) Color temperature adjustable from 3000oK to 10000oK

　　14) Signal processing capability ≥ 14 bits

　　15) Video frame changing frequency ≥ 60Hz

　　16) Screen refresh rate ≥ 1920HZ or 3840HZ

　　17) Brightness adjustment level: 0-100% stepless brightness adjustable, adjustable according to different environmental brightness levels

　　18) Drive mode: 1/40 scan, constant current drive

　　19) Viewing distance ≥ 2 meters

　　20) Anti gamma correction curve, with three or more adjustable gamma curves

　　21) Red, green, blue, and white colors are uniform and visually free of color spots; The monochromatic wavelength error of the entire screen is ≤ 10nm, and the Vf voltage error is less than 0.5V

　　22) The pixel out of control point is less than one in ten thousand, and the edge loss rate is 0

　　23) The protection level complies with the Electronic Industry Standard

　　24) The installation method should be coordinated according to the on-site situation

　　25) Wiring situation, adapted according to the size of the screen

　　26) We provide brand selection and purchasing and installation services on behalf of customers. For specific cooperation methods, please feel free to inquire by phone.

AfterSalesService :

• Suzhou P2 high brush LED display screen