Chong'an District Multi functional Hall Display Screen, no ghosting, high-definition high refresh rate
Category:
Security/LED display screen/LED indoor display screen
Model:
P2
Brand:
Jucai, Jin Lixiang, Gaoke, BOE, Haijia
brand:
Jucai, Jin Lixiang, Gaoke, BOE, Haijia
model:
P2
type:
SMD (Surface Mount Device)
material:
SDM
Specifications:
P2
Installation method:
Wall mounted or floor mounted
rated voltage:
220v
resolution:
1920*1080
pixel density:
two hundred and fifty thousand
Pixel composition:
1R1G1B
brightness:
six hundred
module dimensions:
320*169mm
pixel pitch:
2mm
LED packaging:
patch
Suitable line of sight:
2-6 meters
rated current:
40A
Scope of Application:
Meeting room, lobby, exhibition hall, exhibition hall, lobby
Processing & Customization:
yes
Is it imported:
No
Retail Price
4,350.00USD
重量
kg
- Product Description
-
brand Jucai, Jin Lixiang, Gaoke, BOE, Haijia
model P2
type SMD (Surface Mount Device)
material SDM
Specifications P2
Installation method Wall mounted or floor mounted
rated voltage 220v
resolution 1920*1080
pixel density two hundred and fifty thousand
Pixel composition 1R1G1B
brightness six hundred
module dimensions 320*169mm
pixel pitch 2mm
LED packaging patch
Suitable line of sight 2-6 meters
rated current 40A
Scope of Application Meeting room, lobby, exhibition hall, exhibition hall, lobby
Processing & Customization yes
Is it imported No
Description :
How to solve the problem of ghosting and flower screen in the multifunctional hall display screen of Chong'an District, and flower screen in the LED display screen? There are various reasons why full-color LED display screens cannot display normally. Here, Changzhou Furuilai Electronics has reprinted an article summarizing how to solve the problem of full-color LED display screens. If the new screen malfunctions when powered on, it may be due to incorrect scanning of the control card settings or incorrect wiring (check the wiring from the control card to the board), or incorrect connection of the 5V power supply.
If this phenomenon is suddenly discovered after using it for a period of time, besides a control card malfunction, it may be due to the board getting wet and burning the chip or power supply.
Also, you can try connecting a monitor with a DVI interface to check if the DVI output port of the graphics card has a normal signal. For typical Lingxingyu cards, the DVI interface resolution is 1024 * 768. The cause of LED display screen flickering may also be a problem with the graphics card or driver. Try unplugging the Ethernet cable from the receiver card behind the display screen, press the debug button on the receiver card, and see if the screen body scan is normal.
Part of the electronic display screen is displaying abnormally, such as black screen or blurred screen. Solution: Check if the power supply of the screen with abnormal display is working properly; Signal transmission line failure; Single module failure of the screen body. Output inquiry, check if the circuit from the output interface to the signal output IC is connected or short circuited. Check if the clock latch signal of the output port is normal. Check if the cascaded output data port between a driver IC is connected to the data port of the output interface or if there is a short circuit.
AfterSalesService :
Key words:- Chong'an District Multi functional Hall Display Screen
More Products
