High strength LCP L204G35E J reinforced with Japanese Toray fiberglass
Category:
Rubber and plastic/engineering plastic/LCP
Model:
Brand:
Toray Industries, Japan
Retail Price
65.00USD
重量
kg
- Product Description
-
Description :
LCP L204G35E J Japan Toray
Specification level: High strength, fiberglass reinforced
Injection molding process of LCP:
Due to the significant differences in performance and usage levels after modification, as well as the large variability in processing technology, the following ranges should be adjusted accordingly: 1. Drying: 140 ℃~140~150 ℃/5-7 hours 2. Injection molding temperature: 260~300~410 ℃ 3. Mold temperature: 100~100~240 ℃
L204G35E J Physical Property Table
Physical properties rated value unit test method specific gravity one point six five g/cm3 ASTM 792 shrinkage rate ASTM 955 (Flow) zero point zero five zero % (Horizontal flow) zero point three five % Water absorption rate (24 hours) zero point zero one zero % ASTM 570 mechanical properties rated value unit test method Rockwell hardness (R-scale) one hundred and five ASTM 785 tensile strength one hundred and fifty-five MPa ASTM 638 Elongation (fracture) three % ASTM 1708 flexural modulus MPa ASTM 790 bending strength two hundred MPa ASTM 790 Non notched cantilever beam impact seventy J/m ASTM 256 thermal performance rated value unit test method Hot deformation temperature (1.8 MPa, unannealed) two hundred and fifty-five ℃ ASTM 648 Linear expansion coefficient ASTM 696 (Flow) zero point zero zero zero zero one zero cm/cm/℃ horizontal zero point zero zero zero zero one seven cm/cm/℃ UL flame retardant rating (0.380 mm) V-0 UL 94 Electrical performance rated value unit test method dielectric strength fifty kV/mm ASTM 149 dielectric constant four point one zero ASTM 150 Arc resistance one hundred and ninety sec ASTM 495 AfterSalesService :
Key words:- High strength LCP
