Engineering accessory LCP E7008, made of Sumitomo glass fiber reinforced heat-resistant and chemical resistant materials from Japan
Category:
Rubber and plastic/engineering plastic/LCP
Model:
Brand:
Sumitomo Japan
Retail Price
80.00USD
重量
kg
- Product Description
-
Description :
LCP E7008 Sumitomo Japan
Characteristics: Dimensional stability; Low viscosity; High temperature strength; Weldable; Good formability; High mobility; Good liquidity; Aging resistance; Good adhesion; Chemical resistance; heat-resisting; enhance; Fiberglass reinforcement
Usage: In the field of electrical/electronic applications; Electrical appliances; Engineering accessories; Applications in the automotive field; food container
E7008 Physical Property Table
Physical performance rating unit testing method
Density 1.71 g/cm3 ASTM 792
Molding shrinkage rate
(Flow) 0.17%
(Lateral flow) 1.1%
Water absorption rate 0.020% ASTM 570
Rockwell hardness 107 ASTM 785
Mechanical performance rating unit testing method
Tensile strength 127 MPa ASTM 638
Tensile elongation at break 4.2% ASTM 638
Bending modulus (23 ℃) 11300 MPa ASTM 790
Bending strength (23 ℃, yield) 138 MPa ASTM 790
Shear strength 49 MPa ASTM 732
IZOD notch impact strength (6.4mm) 56 J/m ASTM 256
IZDO notch free impact strength (6.4mm) 280 J/m ASTM 256
Unit testing method for thermal performance rating
Hot deformation temperature (1.8MPa) 242 ℃ ASTM 648
Thermal conductivity 0.56 W/m/K JIS R2618
Flame retardant V-0 UL 94
Oxygen content index 49% JIS K7201
Unit testing method for rated electrical performance values
Volume resistivity 1.0E+15 ohm.cm ASTM 257
Dielectric dissipation constant ASTM 150
(1kHz) 4.7
(1MHz) 4.1
Dielectric dissipation factor ASTM 150
(1kHz) 0.024
(1MHz) 0.030
Arc resistance 125 sec ASTM 495
Comparison of Tracking Index 155 V IEC 60112
AfterSalesService :
Key words:- Engineering Accessories LCP
