Sha Bo PPOPX9406-701 flame retardant electrical components
Category:
Rubber and plastic/engineering plastic/PPO
Model:
Brand:
Basic Innovative Plastics&# 40; United States&# 41
Retail Price
28.00USD
重量
kg
- Product Description
-
Description :
Sha Bo PPOPX9406-701 flame retardant electrical components
Product Features
Conductive Polyphenylene Ether (PPO), also known as Conductive Polyphenylene Ether B in Chinese, is one of the five commonly used engineering plastics in the world. It has the advantages of high rigidity, high heat resistance, flame retardancy/non flammability, high strength, and excellent electrical performance. In addition, Liheng anti-static PPO also has advantages such as wear resistance, non toxicity, and pollution resistance. PPO anti-static PPE has one of the smallest dielectric constants and dielectric losses among engineering plastics, and is almost unaffected by temperature and humidity. PPO can be used in low, medium, and high-frequency electric field fields (the smaller the dielectric constant, the better the insulation). The load deformation temperature of PPO can reach above 190 ℃, and the desorption temperature is -170 ℃.
PX9406-701 Physical Properties Table
Physical properties rated value unit test method specific gravity one point zero nine ASTM 792 Water absorption rate (24 hours) zero point zero six % ASTM 570 Mold shrinkage rate (3.2mm) 5-7 E-3 ASTM 955 mechanical properties rated value unit test method Tensile strength (3.2mm) seventy-five MPa ASTM 638 Tensile strength at break (3.2mm) eighteen % ASTM 638 Bending strength (6.4mm) one hundred and twelve MPa ASTM 790 Bending modulus (6.4mm) two thousand six hundred and forty-six MPa ASTM 790 Gap impact strength (23 ℃) one hundred and sixty J/M ASTM 256 Electrical performance rated value unit test method Loss factor (60Hz) - - ASTM 150 Dielectric constant (1MHz) two point four nine ASTM 150 volume resistance 2.0E+16 ohm·cm ASTM 257 surface resistance 1.0E+16 ohm·cm D257 thermal performance rated value unit test method Heat Deflection Temperature ASTM 648 (0.45MPa) one hundred and thirty-three ℃ (1.80MPa) one hundred and twenty-five ℃ vicat softening point one hundred and fifty ℃ ASTM 1525 UL long-term use temperature UL746B one hundred and five ℃ one hundred ℃ one hundred and five ℃ flame retardancy V-0 AfterSalesService :
Key words:- Sha Bo PPO
