ABS resin AG15A0 Taiwan Taihua

Description :

　　ABS resin AG15A0 Taiwan Taihua

　　Our company has a complete range of ABS models and sufficient supply of PC, PC/ABS alloy, etc. If there is a specified demand, we can directly connect by electric.

　　Taihua ABS resin (acrylonitrile butadiene styrene copolymer, TAIRILIC®); ABS Resin）， Ensure stability in quality and product supply.

　　TAIRILIC® offers a diverse range of ABS resin products, including high gloss, high flowability, heat-resistant, flame-retardant, transparent, and electroplated grades for general, extrusion, and special applications, meeting various needs. Our factory's production equipment adopts strict environmental standards, and our production technology is mature and stable, without any doubts about polluting the environment. The exhaust gas undergoes high-temperature combustion, and the heat is recovered.

　　TAIRILAC AG15A0 Physical Properties Table

　　Physical properties rated value system of units test method

　　specific gravity

　　-- 1.05 g/cm3

　　23°C 1.05 g/cm3 ISO 1183

　　Melt flow rate

　　200°C/5.0 kg 1.7 g/10 min

　　220°C/10.0 kg 19 g/10 min

　　Shrinkage rate - flow 0.40 to 0.70% internal method

　　Rockwell hardness

　　R-grade, 23 ° C 110

　　R scale, 23 ° C 110

　　thermal performance rated value system of units test method

　　Thermal deformation temperature under load

　　1.8 MPa, Unanealed, 12.7 mm, 85.0 ° C

　　1.8 MPa, Annealing at 95.0 ° C

　　Vicat softening temperature 104 ° C

　　flammability rated value test method

　　UL flame retardant rating (1.50 mm, All Colors) HB UL 94

　　Injection rated value unit system

　　Drying temperature 70.0 to 80.0 ° C

　　Drying time 2.0 to 3.0 hours

　　Mold temperature: 40.0 to 80.0 ° C

　　Injection pressure ranging from 68.6 to 108 MPa

　　Injection instructions Screw Temp: 190-230 ° C

AfterSalesService :

• ABS resin