ABS high rigidity AG15E1 Taiwan Taihua electronic shell
Category:
Rubber and plastic/General plastic/ABS
Model:
Brand:
Taiwanization of Taiwan
Retail Price
9.50USD
重量
kg
- Product Description
-
Description :
ABS high rigidity AG15E1 Taiwan Taihua electronic shell
Toys, computers, telephones, clock cases, speaker cases, suitcases
There are many ABS models: AG15A0, AG15AB, AG15AB BK, AG15E1, ANC120, AE8000
AG15A1、AG15AB BK、ANC160、AG15E1D-1000D-120D-150D-190D-2200D-2400、PA-707K、PA-726M、PA-749SK
PA-757K, PA-707, PA-709, PA-709S, PA-717C, PA-727, PA-737, AG15E1, etc., can be directly connected by electricity if needed!
TAIRILAC AG15E1
Acrylonitrile Butadiene Styrene
TAIRILAC AG15E1 Physical Properties Table
Physical properties rated value system of units test method
specific gravity
-- 1.05 g/cm3
23°C 1.05 g/cm3 ISO 1183
Melt flow rate
200°C/5.0 kg 1.8 g/10 min
220°C/10.0 kg 20 g/10 min
Shrinkage rate - flow 0.40 to 0.70% internal method
hardness rated value system of units test method
Rockwell hardness
R-grade, 23 ° C 110
R scale, 23 ° C 110 ISO 2039-2
mechanical properties rated value system of units test method
Tensile strength (23 ° C) 52.0 MPa
Bending modulus (23 ° C) 2750 MPa
bending strength
23°C 85.3 MPa
23°C 86.0 MPa ISO 178
impact performance rated value system of units test method
Non notched cantilever beam impact (23 ° C, 6.35 mm) 140 J/m ISO 180
thermal performance rated value system of units test method
Thermal deformation temperature under load
1.8 MPa, Unanealed, 12.7 mm 84.0 ° C
1.8 MPa, Annealing at 94.0 ° C
Vicat softening temperature 103 ° C ISO 306/A
flammability rated value test method
UL flame retardant rating (1.50 mm, All Colors) HB UL 94
Injection rated value unit system
Drying temperature 70.0 to 80.0 ° C
Drying time 2.0 to 3.0 hours
Mold temperature: 40.0 to 80.0 ° C
Injection pressure ranging from 68.6 to 108 MPa
Injection instructions
Screw Temp: 190-230°C
AfterSalesService :
Key words:- ABS high rigidity
