Qimei ABS PA-707 Taiwan Qimei Ultra High Glossiness, High Rigidity, High Lamp Holder Toy Office Supplies

Description :

　　Qimei ABSPA-707 Taiwan Qimei Ultra High Glossiness, High Rigidity, High Lamp Holder Toy Office Supplies

　　ABSMolding characteristics:

　　1. Amorphous material, with moderate fluidity and high moisture absorption, must be fully dried. Plastic parts that require a glossy surface must be preheated and dried for a long time at 80-90 degrees Celsius for 3 hours;

　　2. It is advisable to use high material temperature and high mold temperature, but if the material temperature is too high, it is easy to decompose (decomposition temperature is>270 degrees) For high-precision plastic parts, the mold temperature should be set at 50-60 degrees Celsius for high gloss Heat resistant plastic parts, the mold temperature should be set at 60-80 degrees;

　　3. To solve the problem of water streaks, it is necessary to improve the flowability of the material by using high material temperature, high mold temperature, or changing the water level;

　　4. If heat-resistant or flame-retardant materials are formed, plastic decomposition products will remain on the surface of the mold after 3-7 days of production, causing the mold surface to shine. The mold needs to be cleaned in a timely manner, and exhaust positions need to be added to the mold surface.

　　PA-707 Physical Property Table

AfterSalesService :

• Qimei ABS