Changsha Biomass Wood Chip Burner 12 Million kcal Compound Fertilizer Drying

Description :

　　Changsha Biomass Wood Chip Burner 12 Million kcal Compound Fertilizer Drying

　　Changsha Biomass Wood Chip Burner 12 Million kcal Compound Fertilizer Drying

　　This catalog specifies the use of coal and its products for industrial production and heating (including raw coal, loose coal, coal gangue, coal slurry, coal powder, coal water slurry, coal, coke, orchid charcoal, etc.), conventional fossil fuels such as oil, and biomass solid formed fuels (biomass solid formed fuels must meet the requirements of industry and local product quality standards, and must all be made from agricultural and forestry residues as raw materials, and it is strictly prohibited to mix any other waste). Excluding agricultural and forestry residues, charcoal and other auxiliary fuels used in the catering industry.

　　Changsha biomass wood powder burner 450000 kcal grain dryer Changsha biomass wood chip burner 12 million kcal compound fertilizer dryer

　　2. The fuel is fed into the furnace by a spiral feeder, where it is gradually preheated, dried, ignited, and burned due to the action of high-temperature flue gas and primary air. During this process, a large amount of volatile matter is released, and the combustion is intense. After the high-temperature flue gas generated flushes the main heating surface of the biomass breeding hot blast stove, it enters the economizer and air preheater at the tail heating surface of the biomass breeding hot blast stove, then enters the dust collector, and is discharged into the atmosphere through the chimney. The un gasified fuel moves towards the rear of the grate until it is completely burned, and the remaining small amount of ash falls into the slag removal port behind the grate.

　　The principle of biomass combustion machine in Suizhou City and the renovation of a 1.8 million kcal 3-ton boiler

　　The combustion characteristics have been significantly improved, with long-lasting and low black smoke during the combustion process, high furnace temperature, and easy storage and transportation. But another problem arises, which is that the design, research, and manufacturing of combustion equipment that is compatible with it cannot meet the growing demand. Blindly converting coal-fired boilers to burn biomass cannot meet the characteristics requirements of biomass fuel. With the continuous advancement of biomass technology, a series of adverse phenomena such as combustion deterioration and low thermal efficiency may occur during the combustion process. This requires us to renovate the existing coal-fired boilers. The density is approximately 0.8-1.4t/m, and the energy density is comparable to that of medium coal. The continuous promotion of biomass fuel molding has to some extent overcome the adverse conditions of biomass fuel. The crushed raw materials are extruded by equipment and molded, and the modified biomass boiler is tested to verify whether it meets the basic design requirements and energy-saving and environmental protection requirements.

　　The introduction of the 12 million kcal compound fertilizer drying machine for biomass wood chip combustion in Changsha is as follows. For more knowledge, please feel free to leave a message for consultation. We provide free renovation plan design and budget. Changsha Biomass Wood Chip Burner 12 Million kcal Compound Fertilizer Drying

AfterSalesService :

• Biomass wood chip burner