LJU100 * 155 * 100 coal mining machine cable clamp with high impact resistance and U-shaped mining cable clamp

Description :

LJU100 * 155 * 100 coal mining machine cable clamp with high impact resistance and U-shaped mining cable clamp

　　1LJU100 * 155 * 100 coal mining machine cable clampboardPurpose and scope of application:

U-shaped mining cable clampSuitable for towing cable clamps used in various models of coal mining machines made of polymer plastics and carbon steel plates, which are used in coal mine comprehensive mining and general mining units.

　　IILJU100 * 155 * 100 coal mining machine cable clampMain structure and working principle:

　　Main structure: The cable clamp is composed of an O-shaped clamp plate, a cross plate, and a connecting pin shaft, which are made up of a carbon steel skeleton wrapped in polymer plastic.

　　Working principle: This product is suspended and installed on the towing cable frame of the coal mining machine, and moves together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　IIILJU100 * 155 * 100 coal mining machine cable clampNotes:

　　When transporting this product, attention should be paid to the protection of the connecting parts.

　　2. The product should be stored in an indoor warehouse at a temperature of -15 ℃~+40 ℃, avoiding contact with open flames.

　　3. During installation, make sure to insert the T-shaped plugs of the transverse connecting plate into the T-shaped slots of the left and right clamping plates respectively, and then use a glue hammer to knock the transverse connecting plate into place;

　　Make the semi-circular positioning hole of the T-shaped plug concentric with the positioning pin hole of the clamp plate; Insert the positioning pin into the positioning pin hole and tap it into place with a rubber hammer.

　　4LJU100 * 155 * 100 coal mining machine cable clampadvantage：

　　The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, simple to maintain and repair, and has a long service life. It also has high tensile strength and impact resistance. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from breakage or damage during towing, improve production efficiency, and reduce maintenance costs.

　　5LJU100 * 155 * 100 coal mining machine cable clampBasic characteristics:

　　1. Appearance

　　The surface of the cable clamp should be smooth and even, and the surface covered with non-metallic materials should not expose the steel plate. After the cable clamp is connected in series, it should rotate

　　Flexible and easy to bend, the bending angle should meet the requirements of the drawing.

　　2. Basic dimensions

　　The geometric dimensions of cable clamps shall comply with the provisions of Table 1 and the processing drawings, with a hole diameter tolerance of H13 (GB/T 1800.4-1999),

　　The deviation of hole spacing limit is GB/T 1804-f level (GB/T 1804-1992), and the dimensional tolerance of H and A is level (GB/T

　　14486-2008), and other dimensional tolerances shall be manufactured according to the unmarked dimensional tolerance MT5 level (GB/T 14486-2008) (see Figures 1-4).

　　3. Tensile strength

　　When the cable clamp is tested according to 7.4 of MT/T117-2007, its tensile strength should reach the working load in Table 2 and be maintained for 2 minutes. After unloading inspection, there should be no residual deformation, cracking, or detachment.

　　4. Tensile strength

　　When the cable clamp is tested according to 7.5 of MT/T117-2007, its tensile strength should not be less than the requirements in Table 2.

　　5. Impact resistance

　　When the cable clamp is tested according to 7.6 of MT/T117-2007, it should be able to withstand the impact energy specified in Table 2 and withstand the impact

　　The cable clamp after impact should not break.

　　6. Bending angle

　　The bending angle and its limit deviation of adjacent cable clamps shall comply with the provisions of Table 3 or as agreed upon by both the supply and demand parties.

　　VILJU100 * 155 * 100 coal mining machine cable clampInstallation and Usage

　　(1). First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, and make the semi-circular positioning holes of the T-shaped plugs

　　Concentric with the positioning pin hole of the clamp plate, the positioning pin is inserted into the positioning pin hole to form a cable clamp groove (2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face. (3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

AfterSalesService :

• Coal mining machine cable clamp