Jiabang Cable Clamp Manufacturer LJU 100 * 145 * 80 Coal Mining Machine Cable Clamp Installation Convenient and Fast

Description :

Jiabang cable clamp manufacturer LJU 100 * 145 * 80 cable clamp for coal mining machine

　　Produced by Shandong Jiabang LJU 100 * 145 * 80 cable clamp for coal mining machinequalityQuantity is the foundation of a brand, quality is the embodiment of quality,The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, easy to maintain and repair, and has a long service life.

　　1LJU 100*one hundred and forty-five*Cable clamp for 80 coal mining machineMain introduction:

　　The cable clamp for coal mining machine is made by injection molding nylon 66 with flame retardant and anti-static agent (nylon 66+flame retardant+anti-static agent) and steel frame. It is connected by pins or bolts to form a protective channel for cables or water pipes according to the needs of the coal mining machine working face.

　　IILJO125*one hundred and eighty-five*Cable clamp for 125 coal mining machinefeature

　　The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, simple to maintain and repair, and has a long service life. It also has high tensile strength and impact resistance. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from reliable operation during towing, prevent breakage or damage, improve production efficiency, and reduce maintenance costs.

　　IIILJU 100*one hundred and forty-five*Cable clamp for 80 coal mining machineClassification and Parameters:

　　total width

　　Inner cavity width 155 130

　　Height H

　　Inner cavity height 120

　　Pin hole center L125

　　Pin hole diameter D 15~17

　　Cable clamps are mainly used for models such as thin coal seam mining machines, double drum mining machines, and shielded mining machines in coal mines. The specific types of cable clamps include four categories: U-shaped, H-shaped, O-shaped, and C-shaped. The main specifications and models of cable clamps include: LJU100 × 135 × 100, LJU100 × 155 × 150, LJH100 × 180 × 100, LJH100 × 180 × 150, LJO125 × 180 × 120, etc.

　　4LJU 100×one hundred and forty-five×Cable clamp for 80 coal mining machineMain function and scope of application:

　　Cable clamps can be widely used in the towing and protection of power cables and water inlet pipes in drum coal mining machines, mainly to protect the cables and water pipes used in underground coal mining machines from breakage and wear.

　　5LJU 100×one hundred and forty-five×Cable clamp for 80 coal mining machineInstallation and use:

　　1. First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　2. Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　3. Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

　　5LJU 100*one hundred and forty-five*Cable clamp for 80 coal mining machineWorking Principle:

　　After connecting adjacent cable clamps with pins or bolts, a protective channel (cable clamp chain) is formed. The cable clamp chain can flexibly rotate a certain angle with the movement of the coal mining machine working face. The inner lining steel strip skeleton is directly used for the connection of adjacent cable clamps, bearing the drag force of the coal mining machine working face movement, protecting the cable or water pipe from the drag force, and ensuring the continuous and normal operation of the coal mining machine.

　　To ensure the quality and price of our products, the company implements a strategic policy that integrates mold development, production, and sales. among whichLJU 100*one hundred and forty-five*Cable clamp for 80 coal mining machineIt is a new product developed by the company in recent years.

AfterSalesService :

• Cable clamp