LJO 125 * 180 * 130 coal mining machine cable clamp structure compact O-type cable clamp 1 meter 8 pieces

Description :

LJO 125 * 180 * 130 coal mining machine cable clamp structure compact O-type cable clamp 1 meter 8 pieces

　　Our main technical personnel are engaged inLJO 125 * 180 * 130 cable clamp for coal mining machineWe have been designing and manufacturing for many years. In terms of technology, we have a design and development team. In production, we adhere to strict production and assembly processes. In terms of service, we provide customers with enthusiastic and timely after-sales service, allowing them to enjoy satisfactory service!

　　1LJO 125 * 180 * 130 cable clamp for coal mining machinestructure

O-type cable clampIt is a composite structure composed of four injection molded plates with embedded steel frames. The assembly method is to rotate and fix the embedded metal rods, and the connection method is to use special bolts. The injection molding material is wear-resistant engineering plastic, and the embedded metal frame is made of stamped steel plates and cold drawn round steel. The connection size, as well as the diameter of the connecting bolts and pin holes, have been standardized and can be interchangeable and modified into various specifications.

IILJO 125 * 180 * 130 cable clamp for coal mining machineProduct features:

　　The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, simple to maintain and repair, and has a long service life. It also has high tensile strength and impact resistance. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from reliable operation during towing, prevent breakage or damage, improve production efficiency, and reduce maintenance costs.

　　IIILJO 125 * 180 * 130 cable clamp for coal mining machineInstallation and use:

　　1. First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　2. Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　3. Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

4LJO 125 * 180 * 130 cable clamp for coal mining machinepurpose

O-type cable clampIt can be widely used in the towing and protection of power cables and inlet pipes of drum coal mining machines.

　　There are four types of cable clamps: LJU, LJC, LJO, and LJH, with a total of 18 specifications.

　　1. Appearance

　　The surface of the cable clamp should be smooth and even, and the surface covered with non-metallic materials should not expose the steel plate. After the cable clamps are connected in series, they should rotate flexibly and bend freely, and the bending angle should meet the requirements of the technical drawings.

　　2. Basic dimensions

O-type cable clampThe geometric dimensions of the hole should comply with the provisions of Table 1 and the machining drawings. The aperture tolerance is H13 (GB/T 1800.4-1999), the maximum deviation of the hole spacing is GB/T 1804-f level (GB/T 1804-1992), the dimensional tolerances of H and A are level (GB/T 14486-2008), and the remaining dimensional tolerances are manufactured according to the unmarked dimensional tolerance MT5 level (GB/T 14486-2008) (see Figures 1-4).

　　3. Tensile strength

　　When the cable clamp is tested according to 7.4 of MT/T117-2007, its tensile strength should reach the working load in Table 2 and be maintained for 2 minutes. After unloading inspection, there should be no residual deformation, cracking, or detachment.

　　4. Tensile strength

O-type cable clampWhen tested according to the provisions of 7.5 in MT/T117-2007, the tensile strength should not be less than the provisions in Table 2.

　　5. Impact resistance

　　When the cable clamp is tested according to 7.6 of MT/T117-2007, it should be able to withstand the impact energy specified in Table 2, and the cable clamp should not break after withstanding the impact.

　　6. Bending angle

　　The bending angle and ultimate deviation of adjacent cable clamps shall comply with the provisions of Table 3 or as agreed upon by both the supplier and demander.

　　Our company adheres to the principle of honesty and quality as the lifeblood of the enterprise. Through a scientific quality management system, comprehensive inspection of product quality is carried out to ensure product quality.LJO 125 * 180 * 130 cable clamp for coal mining machineAll indicators of the factory products meet or exceed national standards.

AfterSalesService :

• Cable clamp for coal mining machine