Mining C-type cable clamp LJC 125 * 180 * 130 cable clamp for coal mining machine can be customized according to drawings

Description :

Mining C-type cable clamp LJC 125 * 180 * 130 cable clamp for coal mining machine

　　1LJC 125×one hundred and eighty×Cable clamp for 130 coal mining machineProduct Introduction

Mining C-type cable clampIt is made of stamped steel plate as the skeleton and modified plastic (polyethylene+flame retardant+anti-static agent) through injection molding processing. According to the needs of the coal mining machine working face, it is connected by special bolts to form a protective channel for cables or water pipes.LJC 125×one hundred and eighty×Cable clamp for 130 coal mining machineOvercoming the shortcomings of traditional cable clamps, such as low mechanical strength and ineffective protection on both sides, cables are easily damaged by debris and coal blocks in the cable tray during operation, poor guiding effect, and easy hanging and folding. It can overcome common causes of cable damage such as "pulling", "folding", "hanging", "smashing", and "squeezing", and can provide comprehensive protection for cables and water pipes.

　　IILJC 125×one hundred and eighty×Cable clamp for 130 coal mining machinePurpose and scope of application:

Mining C-type cable clampSuitable for towing cable clamps used in various models of coal mining machines made of polymer plastics and carbon steel plates, which are used in coal mine comprehensive mining and general mining units.Mining C-type cable clampDeveloped in accordance with the MT/T 775-1998 standard of the coal industry in the People's Republic of China, which specifies the technical conditions for towing cable clamps used in coal mining machines. And it complies with the relevant regulations of MT/117-2007.

　　IIILJC 125×one hundred and eighty×Cable clamp for 130 coal mining machineMain structure:Mining C-type cable clampThe O-shaped clamp plate, cross plate, and connecting pin shaft are composed of a carbon steel skeleton wrapped in polymer plastic.

　　4LJC 125×one hundred and eighty×Cable clamp for 130 coal mining machinePerformance:

　　1. Surface resistance

　　The arithmetic mean of the surface resistance on both the upper and lower surfaces of the non-metallic raw material specimen of the cable clamp shall not exceed 3 × 108 Ω.

　　2. Combustion performance of alcohol spray gun

　　The arithmetic mean of the flame burning time of the alcohol spray lamp for non-metallic raw material specimens of cable clamps shall not exceed 3 seconds, and the single value of the flame burning time for each specimen shall not exceed 3 seconds

　　The arithmetic mean of the flameless combustion time of the specimen shall not exceed 10 seconds, and the single value of the flameless combustion time of each specimen shall not exceed 30 seconds.

　　3. Combustion performance of alcohol lamp

Mining C-type cable clampThe arithmetic mean of the flame burning time of the alcohol lamp for non-metallic raw material specimens shall not exceed 6 seconds, and the single value of the flame burning time for each specimen shall not exceed 6 seconds

　　The arithmetic mean of the flameless combustion time of the specimen shall not exceed 20 seconds, and the single value of the flameless combustion time of each specimen shall not exceed 60 seconds.

　　5LJC 125×one hundred and eighty×Cable clamp for 130 coal mining machineWorking Principle:

　　This product is suspended and installed on the towing frame of the coal mining machine, moving together with the coal mining machine. Mainly responsible for protecting the cables and water pipes used in underground coal mining machines

　　To prevent cable and water pipe breakage and wear.

　　VILJC 125×one hundred and eighty×Cable clamp for 130 coal mining machineInstallation and use:

　　(1). First, insert the T-shaped plug of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, aligning the semi-circular positioning hole of the T-shaped plug with the positioning pin hole of the clamping plate, and positioning the positioning pin

　　Cable clamp groove

　　(2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. (The final length of the work depends on the needs).

　　(3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp for the use of the coal mining machine

　　Since its establishment, the company has always adhered to the belief and purpose of putting reputation first and quality first,LJC 125×one hundred and eighty×Cable clamp for 130 coal mining machineTake every customer seriously. And ensure that every customer who supports us receives satisfactory service. Welcome bosses to come and discuss, thank you for your understanding and support!

AfterSalesService :

• Cable clamp