Jiabang XFD-0.5L laboratory small ore sample flotation equipment 0.5L laboratory small flotation machine

Description :

　　Jiabang XFD-0.5L laboratory small ore sample flotation equipment 0.5L laboratory small flotation machine

　　10.5 liter laboratory small flotation machineProduct Usage

　　0.5 liter laboratory small flotation machineMainly used for mixing, scrubbing, separating, and selecting small amounts of mineral samples in industrial laboratories such as geology, metallurgy, building materials, and chemical engineering.

　　II0.5 liter laboratory small flotation machineProduct Features

　　XFD-0.5L laboratory small amount mineral sample flotation equipmentSuitable for the selection of non-ferrous and black metals, and can also be used for the selection of non-metallic materials such as coal fluorite and talc. Floatation machine, short for floating beneficiation machine, refers to the mechanical equipment that completes the flotation process. In the flotation machine, the slurry treated with chemicals is stirred and aerated to selectively fix some of the mineral particles onto the bubbles; It floats to the pulp surface and is scraped out to form foam products, and the rest is retained in the pulp to achieve the purpose of separating minerals

　　IIIXFD-0.5L laboratory small amount mineral sample flotation equipmentOperation and maintenance

　　Before each operation of the 1.0.5L variable frequency flotation machine, it is necessary to check whether there are any blockages in the tank, whether the impeller is detached, the matching of the belt, and the connection of the screws before starting to work.

　　2. Lubricating oil should be added to each rotating joint, and lubricating grease should be changed at least once every three months at the bearing. Lubricating grease requires a melting point of ≥ 100 ℃

　　3. After each use, clean the tank and impeller, and dry them dry; Keep the machine durable, tidy and beautiful.

　　When replacing the impeller and stator, first unscrew the impeller, then loosen the fastening screws between the stator and the lower body, and replace with a new impeller and stator

　　When moving the flotation machine, the focus should be on the machine body, not on any components, to avoid damage.

　　6. The working temperature of the flotation tank is 15-50 ℃

　　4XFD-0.5L laboratory small amount mineral sample flotation equipmentOperation sequence:

　　1. Connect the power supply according to regulations;

　　20.5L frequency conversion flotation machineTry turning on the device

　　Check the direction of rotation of the spindle, it must rotate clockwise. If not, the power phase sequence should be switched to make the motor rotate clockwise before starting to work.

　　First mix the ore sample with water and pour it into the tank. Start the motor, and the main shaft rotates. The impeller in the tank can start mixing. Then open the valve for inflation. After adding the required agent, foam can be formed. Turn on the scraper motor switch to rotate the scraper. Then the foam can be hung out of the notch, and the material box is placed on the workbench. After the scraped foam is treated, the desired mineral can be obtained.

　　5、 ProcurementLaboratory single cell flotation machineYou need to confirm the following content (product selection guide):

　　1. Flotation tank capacity: (such as 0.5L, 0.75L, 1L, etc.).

　　2. Impeller diameter: (such as ? 45mm, ? 45mm, ? 55mm, ? 60mm, etc.).

　　3. Feed particle size: (such as<0.2mm, etc.).

　　4. Productivity/production volume: (such as 0.2-0.4m3/min, 0.3-0.7m3/min, etc.).

AfterSalesService :

• 0.5 liter laboratory small flotation machine