Jiabang DN350 slurry sampling machine sampling tube slurry sampling machine accessories model complete

Description :

　　Jiabang DN350 slurry sampling machine sampling tube slurry sampling machine accessories model complete

　　1、 DN350 slurry sampling machine sampling tube product introduction:

　　The sampling machine is made of steel shell, stainless steel sampling tube, regulating tube, tin bronze guide, and motor. Reducer and mechanical transmission system. The overall fully automatic equipment composed of the electronic intelligent control part, when not sampling under normal working conditions, the sampling tube controlled by the intelligent electronic control is located inside the sealing rubber sleeve of the guide below the housing.

　　2、 Parameters of DN350 slurry sampling machine sampling tube:

　　1. Slurry pipeline specifications: FTDN series, can be customized according to the actual size of the customer's pipeline for sizes ranging from 50 to 600mm as needed.

　　2. Technical parameters and requirements of DN fully automatic slurry sampling machine:

　　Installation angle: 0-60 °; Motor operating voltage: AC380V; Controller operating voltage: AC220V;

　　Motor power sampling cycle: 2-60 minutes (adjustable); Sampling time: 3.5S/time.

　　3DN350 slurry sampling machine sampling pipeThe flange specifications at both ends are consistent with those of the slurry pipeline flange, making it easy to install and replace.

　　4. The slurry sampling machine adopts thick walled seamless steel pipes, and the material of the sampling pipes is 1Cr18Ni9; The guide tube adopts QSn4-44; Other components are made of steel.

　　IIIDN350 slurry sampling machine sampling pipeEquipment technical performance:

　　1. Vertical sampling, high accuracy, strong representativeness, and adjustable sampling volume.

　　2. The shell is made of thick walled seamless steel pipe, lined with ceramic, and has an operating life of over 10 years.

　　3. The device adopts three sealing rings, one is dust-proof, and there is no slurry leakage.

　　4. Sampling time can be set arbitrarily from 1 second to 60 minutes.

　　5. The electrical control part adopts Siemens PLC programming, and the upper computer is configured with a Weilun 10 inch touch screen. The operation interface is simple and easy to understand, and the photoelectric isolation sensor control technology is used. It is equipped with a complete protection circuit and has sensitive actions,.

　　6. It can be installed freely on the 0-60 degree slurry pipeline without any drop loss to the slurry.

　　7DN350 slurry sampling machine sampling pipeReasonable design and easy operation.

　　A pipeline sampling machine is an automatic sampling device installed on a medium pipeline, which vertically extracts a certain representative sample through a sampling tube for chemical analysis. It can replace manual sampling, improve the stability, uniformity, and reliability of sampling, reduce labor intensity, improve the accuracy and automation of analysis and detection, optimize production conditions, have novel product structure, technology, smooth operation, and reliable functions. Welcome new and old customers to call for consultation!

AfterSalesService :

• Sampling tube of slurry sampling machine