Production mining pipeline DN200 slurry sampling machine DN200 slurry sampling machine parameters

Description :

　　1DN200 slurry sampling machineProduct Details

　　oneDN200 slurry sampling machineCan replace manual sampling, improve the stability, uniformity, and reliability of sampling, and reduce labor intensity.

　　2. Improve the accuracy and automation level of analysis and detection, optimize production conditions, have novel product structures, advanced technology, smooth operation, and reliable functions.

　　threeDN200 slurry sampling machineBy automating the control of sampling points and implementing intelligent sampling, human interference is avoided; Meets the requirements of representativeness, timeliness, and accuracy in regional work.

　　4. Novel structure, reasonable design, reliable performance, easy installation, and simple operation.

　　5. Pipeline installation does not require any height difference and does not cause any drop loss to the slurry.

　　sixDN200 slurry sampling machineThe electrical part adopts photoelectric program control technology, with accurate start and stop time, complete protection appliances, simple control, sensitive action, and safe and reliable.

　　sevenDN200 slurry sampling machineIt is a fully automatic equipment consisting of a steel shell, stainless steel sampling tube, regulating tube, tin bronze guide, motor, reducer and mechanical transmission system, and electronic intelligent control part. When not sampling under normal working conditions, the sampling tube controlled by the intelligent electronic control is located inside the sealing sleeve of the guide below the shell.

　　eightDN200 slurry sampling machineWhen the set time is reached, the controller issues a motor operation command, and the rotational force of the motor is transmitted through the motor command. The rotational force of the motor is transmitted through the mechanical transmission system, and the sampling tube is raised at a constant speed through the guide. The inlet of the sampling tube automatically opens, and vertical sampling begins. After sampling is completed, the electronic control system issues a command to stop the sampling tube in a closed state without slurry wear below.

　　IIDN200 slurry sampling machineTechnical requirements for equipment:

　　The casing of the sampling machine is made of seamless steel pipes with a thickness of 5mm, and the inner wall of the pipe is lined with a ceramic wear-resistant layer with a service life of 6-8 years or more. We are developing and testing flame spraying technology and special composite materials to achieve a lifespan of over 15 years for this product.

　　2. The flange installed on each sampling machine shall be produced according to GB811-59: working pressure of 1.0MPa.

　　threeDN200 slurry sampling machineThe materials used are as follows: motor: Y80M-4-4; Pipeline: Thick walled seamless pipeline; Sampling tube: 1Cr18Ni9; Guiding tube: QSn4-4-4 or PTFE; Other components: steel parts.

　　IIIDN200 slurry sampling machineParameters of slurry sampling machine:

　　Installation angle: 0-60 degrees

　　Motor working pressure AC380V

　　Power 0.55-0.75KW

　　The working voltage of the controller is AC220V.

DN200 pipeline pneumatic sampling machineWith the dedicated efforts of all employees,DN200 fully automatic slurry sampling machineWe have always been committed to providing customers with high-level services, from consulting, design, material selection, construction, supporting to after-sales service. We do our best and cooperate with perfect management methods to strive for higher customer enjoyment.

AfterSalesService :

• DN200 slurry sampling machine