The GL-PVC-70 mining cable hook in Inner Mongolia and Xinjiang is suitable for cable installation in underground tunnels

Description :

1、 Flame retardant and anti-static GL-PVC-70 mining cable hookProduct Features:

　　Flame retardant and anti-static - The anti-static and flame-retardant components of the hook are evenly distributed in the hook body, so the anti-static and flame-retardant performance indicators will not be affected by time. The anti-static and flame-retardant properties meet the standards of the coal mining industry and are suitable for underground flammable and explosive workplaces.

Flame retardant and anti-static GL-PVC-70 mining cable hookLightweight and easy to install - with low hook density, light weight, low cost, and convenient transportation and safety, it can not only reduce the labor intensity of workers and improve work efficiency when used for underground installation, but also has low engineering cost.

Flame retardant and anti-static GL-PVC-70 mining cable hookAnti aging and corrosion resistance - The hook has good anti-aging performance, is not easy to embrittle, has good toughness, and absorbs impact force.

　　Long service life - Under normal conditions, the service life can reach 50 years.

　　IIFlame retardant and anti-static GL-PVC-30 mining cable hookInstallation instructions:

　　1) Select suitable cable hooks based on the cable model and outer diameter, with a hanging position of 1.2m~1.8m (or limited to the cable not hanging down). Each unit should hang one or more cable hooks.

　　2) Flame retardant and anti-static GL-PVC-30 mining cable hookWhen hanging, first drill holes in specialized bolts or other suspension components to fix the hook on the wellbore wall. When fixing the hook, the curved hook should be vertically hanging down. If multiple cables are suspended, a set of hooks should be used to hang them in series with each other. The construction personnel first connect the hooks in pairs on the ground and then fix them according to the previous method.

　　3) When two hooks are connected in series, first align the hanging hole of one hook with the hanging rod of the other hook. The straight rod segments of the two hooks form a right angle, press in firmly to fully insert the hanging rod into the hanging hole, and then hold the arc-shaped hook and rotate it to make the straight rod segments of the two hooks 180 ℃. The clasp of one hook fits perfectly into the recess of another hook.

　　4) After confirming that the cable has entered the arc-shaped hook as a whole, the construction personnel can release the cable.

AfterSalesService :

• Mining cable hook