Factory use split type CH-80 hydraulic punching machine, angle steel punching copper bar punching machine, hydraulic hole opener
Category:
mechanical equipment/machine tool/Punching riveting machine
Model:
CH-80
Brand:
Jiabang
model:
CH-80
Specifications:
CH-80
power:
11kw
Maximum rivet diameter:
twenty
Maximum output pressure:
three hundred and fifty
Scope of Application:
industrial and mining enterprises
purpose:
stamping
Power Type:
pneumatic
weight:
thirty-four
Retail Price
1,200.00USD
重量
kg
- Product Description
-
model CH-80
Specifications CH-80
power 11kw
Maximum rivet diameter twenty
Maximum output pressure three hundred and fifty
Scope of Application industrial and mining enterprises
purpose stamping
Power Type pneumatic
weight thirty-four
Description :
1Split type CH-80 hydraulic punching machineProduct Introduction
Angle steel punching machine is a hydraulic punching tool used for copper bars, aluminum bars, iron plates and other metal materials in the installation of switchgear, distribution panels and wiring engineering. It consists of a manual pump or electric pump and a working head, and the oil hose is connected by a quick connector for reliable sealing. There are no directional restrictions when working quickly. Multiple specifications of molds can be customized, with 4 randomly matched molds. The main force head of CH-75 hydraulic punching machine is made of high-strength alloy steel, which is lightweight and easy to carry. It only takes 20-30 seconds to punch a hole once.
2、 Characteristics of the Split CH-80 Hydraulic Punching Machine:
1. Fast punching speed and accurate positioning. No noise, no chips, safe and clean operation
2. Easy to carry, suitable for field operations or fixed in the factory for large-scale production.
3. Single hole oil return. The mold is made of high carbon tungsten alloy steel, which is stamping resistant and has a long service life.
4. Various shapes of punching molds can be made.
5. The split type CH-80 hydraulic punching machine can be used with an electric pump or a manual pump, and the manual pump is more suitable for use in outdoor areas without power supply.
4、 The usage method and tool inspection of the split CH-80 hydraulic punching machine before use
1. Tighten the male connector on the pump high-pressure tube and the female connector on the tool
2. Select the corresponding upper and lower molds, install the upper mold first and then the lower mold. When installing the upper mold, first screw the positioning screw out of a certain position
Insert the lower mold again, make sure it is in place, and then tighten the positioning screw to start the operation.
3. Place the workpiece in place, tighten the oil pump return screw, turn the handle until the work is completed, and then loosen the return screw, such as by punching thinner gold
When using sheet metal, be sure to insert the return pad between the return stand and the workpiece, otherwise the workpiece will get stuck on the mold. Copper to be pierced
The row must be placed between the upper and lower cutting dies.
AfterSalesService :
Key words:- Hydraulic punching machine
More Products
