Jiabang MDS torque multiplier has a wide range of applications. The principle of mining torque multiplier is simple

Description :

　　MDS-75 Torque Amplifier MDS-100MDS-150 Torque Multiplier MDS-200 Torque Wrench Composition Principle:

　　This product consists of a short handled ratchet wrench, lock, torque multiplier, reaction arm claw (reaction foot), and socket wrench. The principle is that the operator only needs to apply a small force to obtain 4-70 times the output torque, thus completing the sturdy or disassembly work of bolts and nuts easily and quickly.

　　Torque multiplierInstallation method

　　During installation, please do not use the actuator part of the valve as a lifting point to avoid damaging the actuator and accessories.

　　2. This type of valve should be installed in the horizontal or vertical direction of the pipeline.

　　3. The pipeline near the installation point of MDS-55 torque multiplier should not be lowered or subjected to external forces. Pipeline brackets or supports can be used to eliminate pipeline deviation.

　　4. Remove the protective covers on both sides of the flange end and rinse and clean with the valve fully open.

　　Before installation, the entire machine should be tested according to the specified signal (electric or gas) to prevent vibration from affecting performance during transportation. Only after passing the test can it be installed online (wiring should follow the electric actuator circuit diagram).

　　Before connecting the MDS-55 torque multiplier to the pipeline, it is necessary to flush and remove any remaining impurities in the pipeline (which may damage the valve seat and ball).

　　7. After connecting to the pipeline, please cross tighten the flange connection bolts with the specified torque.

AfterSalesService :

• Torque multiplier