DN200 slurry pipeline automatic sampling machine material for coal mine slurry sampling machine with high accuracy

Description :

　　DN200 slurry pipeline automatic sampling machineTechnical Specifications

　　1. Slurry pipeline specifications: FTB/GDQY-DN can be customized according to the actual size of the customer's pipeline, with a diameter of 50-900mm as needed

　　2. Technical parameters and requirements: Installation angle 0~60 °; The working voltage of the motor is AC380V; The working voltage of the controller is AC380V; Motor power of 0.55~3KW; sampling period of 2~60 minutes (adjustable); Sampling time: 3.5 seconds per time.

　　3. Technical parameters and requirements: The specifications of the flanges at both ends of the sampling machine and the slurry pipeline flange must be consistent for easy installation and replacement. The sampling machine adopts thick walled seamless steel pipe, and the material of the sampling pipe is 1Cr18Ni9; The guide tube adopts QSn4-4-4 or PTFE; Other components are made of steel. Each sampling machine is equipped with one controller

　　The specifications of the flanges at both ends of the sampling machine and the slurry pipeline flange must be consistent for easy installation and replacement. The sampling machine adopts thick walled seamless steel pipe, and the material of the sampling pipe is 1Cr18Ni9; The guide tube adopts QSn4-4-4 or PTFE; Other components are made of steel. Each sampling machine is equipped with one controller

　　IIDN200 slurry pipeline automatic sampling machinePerformance Introduction:

　　The DN200 slurry sampling machine can replace manual sampling, improve the stability, uniformity, and reliability of sampling, reduce labor intensity, improve the accuracy and automation of analysis and detection, optimize production conditions, have a novel product structure, advanced technology, smooth operation, and reliable functions.

　　By automating the control of sampling points and implementing intelligent sampling, human interference is avoided; Meets the requirements of representativeness, timeliness, and accuracy in regional work. Novel structure, reasonable design, reliable performance, easy installation, and simple operation.

　　The specifications of the flanges at both ends of the sampling machine and the slurry pipeline flange must be consistent for easy installation and replacement. The sampling machine adopts thick walled seamless steel pipe, and the material of the sampling pipe is 1Cr18Ni9; The guide tube adopts QSn4-4-4 or PTFE; Other components are made of steel. Each sampling machine is equipped with one controller

　　DN200 slurry pipeline automatic sampling machineProduct Description

　　The FTB/GDQY-DN pipeline sampling machine is a new type of pipeline automatic sampling device installed on the medium pipeline, which vertically extracts a certain representative sample through the sampling tube for chemical analysis.

　　Model Description: FTB/GDQY-N N: Pipe Inner Diameter (mm) According to design requirements

　　When the set time is reached, the controller issues a motor operation command, and the rotational force of the motor is transmitted through the motor command. The rotational force of the motor is transmitted through the mechanical transmission system, and the sampling tube is raised at a constant speed through the guide. The inlet of the sampling tube automatically opens, and vertical sampling begins. After sampling is completed, the electronic control system issues a command to stop the sampling tube in a closed state without slurry wear below.

AfterSalesService :

• Automatic sampling machine for slurry pipeline