DN100 slurry sampling machine has reliable performance. Jiabang fully automatic slurry sampling machine
Category:
Instrumentation/Analytical instruments/sampler
Model:
DN100
Brand:
Shandong Jiabang Mining Technology Co., Ltd
model:
DN100
Installation method:
portable
display mode:
Digital Display
Sampling flow range:
0-50
power supply voltage:
three hundred and eighty
ambient temperature:
0-60
Sampling flow accuracy:
ninety-nine
sampling time:
fifteen
noise:
eighty-five
weight:
eighty
Retail Price
1,100.00USD
重量
kg
- Product Description
-
model DN100
Installation method portable
display mode Digital Display
Sampling flow range 0-50
power supply voltage three hundred and eighty
ambient temperature 0-60
Sampling flow accuracy ninety-nine
sampling time fifteen
noise eighty-five
weight eighty
Description :
1DN100 pipeline sampling machine for samplingPerformance Introduction:
DN100 pipeline sampling machine for samplingIt can replace manual sampling, improve the stability, uniformity, and reliability of sampling, reduce labor intensity, improve the accuracy and automation of analysis and detection, optimize production conditions, have novel product structure, advanced technology, smooth operation, and reliable functions.
By automating the control of sampling points and implementing intelligent sampling, human interference is avoided; Meets the requirements of representativeness, timeliness, and accuracy in regional work. Novel structure, reasonable design, reliable performance, easy installation, and simple operation.
The flange installed on each sampling machine is produced according to GB811-59: working pressure of 1.0MPa. The material used for the sampling machine is as follows: motor: Y80M-4-4; Pipeline: Thick walled seamless pipeline; Sampling tube: 1Cr18Ni9; Guiding tube: QSn4-4-4 or PTFE; Other components: steel parts.
IIDN100 pipeline sampling machine for samplingProcess and technical conditions
Installation angle 0-60 degrees, motor working pressure AC380V, power 0.55-3KW, controller working voltage AC380V.
The electrical part adopts photoelectric program control technology, with accurate start and stop time, complete protection appliances, simple control, sensitive action, and safe and reliable.
DN100 pipeline sampling machine for samplingTechnical Specifications
1. Specification of slurry pipeline:DN100 pipeline sampling machine for samplingAccording to the actual size of the customer's pipeline, a diameter of 50-900mm can be customized as needed
2DN100 slurry sampling machineTechnical parameters and requirements: Installation angle 0~60 °; The working voltage of the motor is AC380V; The working voltage of the controller is AC380V; Motor power of 0.55~3KW; sampling period of 2~60 minutes (adjustable); Sampling time: 3.5 seconds per time.
3. Technical parameters and requirements: The specifications of the flanges at both ends of the sampling machine and the slurry pipeline flange must be consistent for easy installation and replacement. The sampling machine adopts thick walled seamless steel pipe, and the material of the sampling pipe is 1Cr18Ni9; The guide tube adopts QSn4-4-4 or PTFE; Other components are made of steel. Each sampling machine is equipped with one controller
The specifications of the flanges at both ends of the sampling machine and the slurry pipeline flange must be consistent for easy installation and replacement. The sampling machine adopts thick walled seamless steel pipe, and the material of the sampling pipe is 1Cr18Ni9; The guide tube adopts QSn4-4-4 or PTFE; Other components are made of steel. Each sampling machine is equipped with one controller
AfterSalesService :
Key words:- Slurry sampling machine
More Products
