Shaanxi DN200 Pipeline Pneumatic Sampling Machine DN200 Fully Automatic Slurry Sampling Machine Manufacturer

Description :

　　DN200 pipeline pneumatic sampling machineProduct Description

　　The FTB/GDQY-DN pipeline sampling machine is a new type of pipeline automatic sampling device installed on the medium pipeline, which vertically extracts a certain representative sample through the sampling tube for chemical analysis.

　　Model Description: FTB/GDQY-N N: Pipe Inner Diameter (mm) According to design requirements

　　When the set time is reached, the controller issues a motor operation command, and the rotational force of the motor is transmitted through the motor command. The rotational force of the motor is transmitted through the mechanical transmission system, and the sampling tube is raised at a constant speed through the guide. The inlet of the sampling tube automatically opens, and vertical sampling begins. After sampling is completed, the electronic control system issues a command to stop the sampling tube in a closed state without slurry wear below.

　　DN200 pipeline pneumatic sampling machineTechnical requirements for equipment:

　　The casing of the sampling machine is made of seamless steel pipes with a thickness of 5mm, and the inner wall of the pipe is lined with a ceramic wear-resistant layer with a service life of 6-8 years or more. We are developing and testing flame spraying technology and special composite materials to achieve a lifespan of over 15 years for this product.

　　2. The flange installed on each sampling machine shall be produced according to GB811-59: working pressure of 1.0MPa.

　　3. The material used for the sampling machine is as follows: motor: Y80M-4-4; Pipeline: Thick walled seamless pipeline; Sampling tube: 1Cr18Ni9; Guiding tube: QSn4-4-4 or PTFE; Other components: steel parts.

AfterSalesService :

• Pipeline pneumatic sampling machine