Jiabang JQL-405 pneumatic chain saw has reliable performance and fast cutting speed

Description :

　　Produced by our factoryJQL-405 Pneumatic Chain SawWidely used for cutting circular chains, pipelines, channel steel and other metals underground in mines,Mining pneumatic chain sawWe are a high-tech enterprise that integrates research and development, manufacturing, sales, and self operated import and export qualifications for mining support equipment and tools. Below, I will introduce the parameters to you.

　　1JQL-405 Pneumatic Chain SawIntroduction and Function:

　　The JQL-405 pneumatic chain saw is widely used for cutting circular chains, pipelines, channel steel and other metals underground in mines. The JQL-405 pneumatic chain saw is mainly used for cutting rocks, concrete, pipes, bricks, and wood. The JQL-405 pneumatic chain saw can be used for slotting and masonry of enclosed walls. The JQL-405 pneumatic chain saw can also be used for rescue and dismantling in dangerous situations.

　　IIJQL-405 Pneumatic Chain SawModel representation:

　　J Q L—405

　　J: Saw

　　Q: Pneumatic

　　J: Chain

　　405: Chain length 405

　　Technical parameters of JQL-405 pneumatic chain saw

　　Working pressure 0.4-0.63MPa

　　Motor speed 4000R/MIN

　　Motor power 2.5KW

　　Saw chain speed 400M/MIN

　　IIIJQL-405 Pneumatic Chain SawFeatures:

　　1. The chain is compatible with the electric chain saw and easy to obtain.

　　2. The JQL-405 pneumatic chain saw is lightweight and can be operated by a single person.

　　3. The JQL-405 pneumatic chain saw motor has high power, high speed, high power, fast cutting speed, and low-pressure start.

　　JQL-405 Pneumatic Chain Saw Chain Upward Method

　　1. Firstly, loosen the fixing bolts of the saw chain cover and remove the cover.

　　2. Hang one end of the saw chain on the sprocket and place the other end on the end of the guide plate. (Pay attention to the direction of the blade) Insert the entire saw chain into the chain groove of the guide plate.

　　3. The appropriate adjustment of chain saw tension has a significant impact on sawing work and maintaining the service life of the saw chain. Use a screwdriver to adjust the adjustment screw, increasing tension by turning right and decreasing tension by turning left.

　　4JQL-405 Pneumatic Chain SawPrecautions for use:

　　1. Before using the pneumatic chain saw, the saw teeth of the saw chain should be ground:

　　2. The serrations must be kept sharp so that the saw chain remains in place throughout the cutting operation.

　　3. When filing the saw teeth, smoothly push it forward in one direction, and when pushing the file back, do not touch the blade. Do not bounce back and forth.

　　After filing the saw teeth two or three times, the rake also needs to be slightly lowered. The toothed rake plays a role in measuring the depth of the blade. When the height of the tooth cutter decreases, it causes the inability to cut. The solution is to first use a flat file to grind the upper part of the tooth rake so that it is about 0.5mm lower than the tip of the tooth cutter. Be careful not to file the tooth rake too much, otherwise the tooth cutter will be sawed too deep at once, causing the chain saw to get stuck during cutting.

　　The company regards quality as its life,JQL-405 Pneumatic Chain SawEnterprises strictly implement the IS09001.2000 quality system standard in the production process. All products are made of raw materials, and we have a technical service team,Mining pneumatic chain saw manufacturerSolve the problems you encounter during use, looking forward to your call for consultation.

AfterSalesService :

• Pneumatic chain saw