BT35-II-2.8 Pipeline Explosion proof Axial Flow Fan 380/220 High Air Volume Explosion proof Axial Flow Fan

Description :

BT35-II-2.8 Pipeline Explosion proof Axial Flow Fan 380/220 High Air Volume Explosion proof Axial Flow Fan

　　1BT35-II-2.8 Pipeline Explosion proof Axial Flow FanInstallation method

　　Fixed type: Fixed type can also be divided into wall type, also known as pipeline type, which fixes the fan at the ventilation opening.

　　Post type: also known as mobile type, with a post bracket and rollers on the bracket, which can be moved anywhere and is easy to use.

　　IIBT35-II-2.8 Pipeline Explosion proof Axial Flow FanProduct function and applicable places

　　1. Suitable for Zone 1 and Zone 2 explosive gas environments, it is a choice for ventilation and air exchange in factories and warehouses or for enhancing simultaneous heat dissipation;

　　2. Suitable for IIA, IIB, IIC explosive gas environments (explosion-proof level);

　　3. Suitable for environments with temperature groups T1-T6;

　　4. Suitable for explosive hazardous environments such as petroleum and petrochemical, chemical, brewing, pharmaceutical, painting, textile, printing and dyeing, facilities, etc;

　　5. Explosion proof mark: ExdIIBT4Gb (can be customized as CT4)

　　IIIBT35-II-2.8 Pipeline Explosion proof Axial Flow FanProduct Features

　　1. Explosion proof axial fan is composed of explosion-proof motor, blades, air duct and other components.

　　2. The air duct is made of rolled steel plates and has high strength.

　　3. The fan blades are cast from aluminum alloy.

　　3. The motor has reliable performance, low energy consumption, and long lifespan.

　　4. The explosion-proof axial flow fan is an improved and upgraded version of the BAF explosion-proof axial flow fan, so various performances have been enhanced.

　　5. The motor has reliable performance, low energy consumption, and long lifespan.

　　6. Cable routing.

　　4BT35-II-2.8 Pipeline Explosion proof Axial Flow Fanmaintenance

　　The usage environment should be kept clean, the surface of the fan should be kept clean, and there should be no debris at the inlet and outlet. Regularly remove dust and other debris from the fan and pipes.

　　2. It can only operate when the fan is completely normal, and at the same time, it is necessary to maintain sufficient capacity of the power supply facilities, stable voltage, and strictly prohibit phase loss operation. The power supply line must be a dedicated line and temporary lines should not be used for long-term power supply.

　　If any abnormal noise, severe motor heating, shell electrification, switch tripping, or inability to start is found during the operation of the fan, it should be stopped immediately for inspection. For safety reasons, maintenance during the operation of the fan is not allowed.

　　4. Regularly supplement or replace lubricating oil for bearings according to the environmental conditions of use (motor enclosed bearings do not need to replace oil during their service life). To ensure good lubrication of the fan during operation, the number of oil refills should not be less than 1000 hours per time.

　　5. The fan should be stored in a dry environment to prevent the motor from getting damp. When the fan is stored outdoors, rainproof measures should be taken. During storage and handling, the fan should be protected from collision to prevent damage.

BT35-II-2.8 Pipeline Explosion proof Axial Flow FanSpecial precautions:

　　The grounding of the fan casing or motor casing must be reliable;

　　2. It is prohibited to rotate in the opposite direction, operate beyond the rated current, and operate without phase loss;

　　3. Maintenance is prohibited during the operation of the fan.

AfterSalesService :

• Pipeline explosion-proof axial flow fan