1.2m 1.5m mining reflective tape anti fall rope 0.6m 0.8m mining anti fall chain single anti fall rope

Description :

　　1.2m and 1.5m mining reflective tape anti fall rope

　　The other end of the mining anti fall rope can be in the form of a hook or a lifting ring, or a device that fastens the metal top beam π - shaped beam can be used to tighten it and provide complete support protection.

　　1.2m and 1.5m mining reflective tape anti fall rope

　　Usage method of anti overturning rope for mining:

　　One end of the anti fall rope for mining is tied to a single pillar using a hook type and wrapped with 2-3 rounds of steel wire rope to prevent the pillar from tipping over. The other end of the anti fall rope for mining can be fastened using a hook or lifting ring, or a device that fastens the π - shaped metal top beam to provide complete protection for the pillar.

　　Use and maintenance of reflective anti fall rope:

　　1. Users must undergo training and pass an examination before they can take up their posts to ensure correct usage methods.

　　To ensure safe wearing, the activity clip should be securely fastened. The safety hook must be securely fastened and should not be used in high temperatures above 120 ° C. Check before each use and stop using immediately if any abnormalities are found.

　　3. The safety belt should be hung high and used low to prevent swinging and collision. It is not allowed to tie the rope or directly hang it on the safety rope. It should be hung on the connecting ring and should not be used when the body is loaded.

　　4. It should be cleaned regularly, placed on a shelf after use, and washed clean with soapy water. It should be stored in a warehouse with room temperature of 0 ℃ -30 ℃ and relative temperature below 80%. It should not come into contact with open flames, acid, sharp objects, or be exposed to sunlight.

　　5. After using the seat belt for one month, conduct a batch inspection according to the purchased quantity. Conduct a static load test on the fence belt with a tension of 225 kilograms for one minute, conduct an impact test on the suspended safety belt with a weight of 80 kilograms, and conduct a free fall test without breaking. Only when all components are undamaged or deformed can they continue to be used. Otherwise, they are not allowed to be used.

AfterSalesService :

• Mining reflective tape anti overturning rope