Jiabang 600mm gauge mining car wheelset, 300 diameter cast steel mining car wheelset

Description :

Jiabang 600mm gauge mining car wheelset structure composition

　　Usually, the wheels, shafts, bearings, sealing materials, etc. together form the wheel set of a mining car.

　　The walking mechanism of the mining car consists of two wheelsets consisting of four wheels and two axles.

　　When the total amount of mining cars and materials exceeds 20 tons, the number of wheelsets should generally be increased.

　　For mining cars with more than two wheelsets, in order to facilitate the combination of the two wheelsets into a small car with a turntable through bends, this type of car is called a bogie.

Requirements for fixed mining truck wheelsets:

　　Each set of fixed mining cars is composed of a carriage, frame, buffer head, wheels and other components to ensure completeness; Each mining car is equipped with 2 locking pins.

　　⑴ The wheel axle is made of Φ 60 round steel;

　　The bearing model used is 6310E, and the factory certificate of conformity and other relevant documents for the bearing should be provided;

　　⑶ Fully sealed wheels, with a wheelbase of 600mm after assembly; The standard weight of a single wheel must reach 25kg; the weight of each set of wheelsets after assembly must be ensured to be above 62kg; The fastening screw caps of the wheel end caps are all made of national standard parts, and anti backlash washers are added. The bottom pins with open mouth pins are all made of national standard parts,

　　⑷ The wheels must be filled with lithium grease and butter, and waterproof sealing rings must be installed on the inner and outer gray covers and main shaft parts; The wheel set is designed with refueling holes for easy refueling.

AfterSalesService :

• Mine car wheelset