LJH100 * 180 * 145 coal mining machine cable clamp, coal mine cable clamp, LJH type cable clamp

Description :

　　LJH100 × 180 × 145 coal mining machine cable clamp, coal mine cable clamp, LJH type cable clamp

　　Main structure: The cable clamp is composed of an O-shaped clamp plate, a cross plate, and a connecting pin shaft, which are made up of a carbon steel skeleton wrapped in polymer plastic.

　　2、 Working principle of LJH100 * 200 * 150 coal mining machine cable clamp: This product is suspended and installed on the towing frame of the coal mining machine, moving together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　How to install and use LJH100 × 180 × 145 coal mining machine cable clamp and LJH type cable clamp

　　(1). First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　(2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　(3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

AfterSalesService :

• Coal mining machine cable clamp