The DN150 pipeline automatic sampling machine has a novel structure and is made of Shaanxi slurry sampling machine material

Description :

　　1DN150 fully automaticSlurry sampling machineworking principle

　　By utilizing the telescopic operation of the pneumatic actuator, the connecting rod is driven to move, and the connecting rod drives the slider to reciprocate above the guide rail. The slider in turn drives the sampling tube to traverse the slurry flow back and forth, allowing samples from multiple parts of the slurry to flow into the sampling tube, thereby improving the uniformity and representativeness of sampling.

　　IIDN150 fully automatic slurry sampling machineTechnical Specifications

　　1. Slurry pipeline specification: FYDN can be customized according to the actual size of the customer's pipeline with a diameter of 50-600mm as needed

　　2. Technical parameters and requirements: Installation angle 0~60 °; The working voltage of the controller is AC220V; Sampling period 2-60 minutes (adjustable); Sampling time: 3.5 seconds per time.

　　3. Technical parameters and requirements: The specifications of the flanges at both ends of the sampling machine and the slurry pipeline flange must be consistent for easy installation and replacement. The sampling machine adopts thick walled seamless steel pipe, the material of the sampling tube is 1Cr18Ni9 stainless steel, and the sampling sleeve of the sampling tube is made of PTFE material, also known as valve head; The guide tube adopts QSn4-4-4; Other components are made of steel. Each sampling machine is equipped with one controller.

DN150 fully automatic slurry sampling machinePerformance Characteristics

　　The actual use in mineral processing shows that this pipeline sampling machine has high sampling representativeness and reliability. Can be used for sampling various fluid pipelines. Its usage characteristics are as follows:

　　(1) Pipeline sampling machine is an automated equipment that performs real-time online sampling on the slurry pipeline.

　　(2) The sampling volume, sampling time, and interval can be set by the user according to the actual usage situation without stopping the mine.

　　(3) High reliability and long service life.

　　(4) As a pneumatic mechanism, the sampling tube operates at a lower speed, is safe to use, and is easy to operate.

　　(5) Using the special operation mode of the pipeline sampling machine, extract slurry samples perpendicular to the direction of slurry flow. Make the mineral samples intercepted by the sampling tube have high sampling uniformity and representativeness.

　　(6) Action mode. When the slurry passes through the pipeline sampling machine, the sampling tube performs horizontal reciprocating motion, directly taking representative samples and self flowing them to the sampling bucket for convenient sampling.

　　(7) Sampling method. There are two sampling operation modes: automatic continuous sampling and manual single sampling.

　　(8) It is a slurry pipeline sampling device that can change the size of the sampling volume. By changing the operating speed of the pneumatic actuator, the speed at which the sampling tube cuts the overflow slurry, and the flow rate of the slurry sample entering the sampling tube, the size of the sampling volume can be adjusted.

　　(9) It is possible to perform scheduled maintenance and replacement of the sampling tube and other vulnerable moving parts of the sampling machine online without stopping the production process.

AfterSalesService :

• Pipeline automatic sampling machine