MSCK2360 mining resin anchoring agent is convenient to use for mining anchor rod anchoring agent
Category:
fine chemicals /Synthetic adhesive/resin adhesive
Model:
MSCK2360
Brand:
Jiabang
model:
MSCK2360
Hardening/curing method:
Multi temperature zone hardening
Main types of adhesive materials:
Composite of thermosetting thermal materials and elastomers
substrate:
Biological tissues, bones, and dental materials
Physical form:
Solvent-free type
Performance Characteristics:
Quick response time
purpose:
Adhesive material
Effective ingredient content:
ninety-nine
appearance:
cylindrical
Packing Specification:
twenty-five
Storage method:
Indoor storage
shelf life:
a year
Place of Origin:
Shandong
manufacturer:
Shandong Jiabang Mining Technology Co., Ltd
Retail Price
1.10USD
重量
kg
- Product Description
-
model MSCK2360
Hardening/curing method Multi temperature zone hardening
Main types of adhesive materials Composite of thermosetting thermal materials and elastomers
substrate Biological tissues, bones, and dental materials
Physical form Solvent-free type
Performance Characteristics Quick response time
purpose Adhesive material
Effective ingredient content ninety-nine
appearance cylindrical
Packing Specification twenty-five
Storage method Indoor storage
shelf life a year
Place of Origin Shandong
manufacturer Shandong Jiabang Mining Technology Co., Ltd
Description :
The function of resin anchoring agent
Resin anchor support is an essential and extremely important technical safety measure in modern coal mining production. Resin anchoring agent is used as a bonding material as an anchoring medium for anchor rods and flexible anchor rods (cables), providing support for the roof and side walls of coal mines and tunnels. (Reinforced anchor rods, support for mining tunnels)
Usage method of mining resin anchoring agent
① Select the specification and model of anchoring agent based on the diameter of the borehole.
② According to the specifications of the anchoring agent and the length of the rod as required by the design, determine the drilling depth to be 60-80mm longer than the total length of the rod.
③ Use compressed air to clean the floating dust in the eye holes.
④ According to the designed anchoring length, use a rod to feed the selected anchoring agent into the bottom of the hole, start the mixer to drive the rod to rotate and stir (stirring time is 8-15s for ultra fast type; 20-35s for other types), and push it uniformly to the bottom of the hole.
⑤ After removing the mixer, promptly clamp the rod in the hole. Do not move or shake the rod before curing, especially when installing the top eye. Test the anchoring force after 10 minutes of ultra fast, 15 minutes of fast, and 30 minutes of medium speed
⑥ Ultra fast, fast, and medium speed can be loaded by tightening the nut on the upper support plate after 10-60s, 90-180s, and 480s, respectively.
⑦ According to the on-site power conditions, the mixing installation tool can use TJ-9 pneumatic anchor rod mixer or electric coal drill with connecting head, and the tightening nut can use QB-16 pneumatic wrench or manual wrench If using an anchor rod drilling rig for operation, drilling and installing anchor rods on the same machine is more convenient
AfterSalesService :
Key words:- Mining resin anchoring agent
More Products
