LDZ-200 coal mine anchor rod tension meter is easy to operate, 200kn anchor rod tension meter material is good
Category:
Instrumentation/Pressure instrument/Tension gauge
Model:
LDZ-200
Brand:
Jiabang
model:
LDZ-200
type:
testing tool
Processing & Customization:
No
measurement range:
0-200
measurement accuracy:
tall
maximum load:
fifty
Place of Origin:
Shandong
manufacturer:
Shandong Jiabang Mining Technology Co., Ltd
Retail Price
370.00USD
重量
kg
- Product Description
-
model LDZ-200
type testing tool
Processing & Customization No
measurement range 0-200
measurement accuracy tall
maximum load fifty
Place of Origin Shandong
manufacturer Shandong Jiabang Mining Technology Co., Ltd
Description :
LDZ-200 Anchor Rod Tension GaugeOverview
The LDZ-300 coal mine anchor rod tension meter is a detection tool for measuring the anchoring force of anchor rods. It plays a significant role in the research of various anchor rods in anchor spray support theory and the inspection of engineering quality. Its range can be selected from 10 tons, 20 tons, and 30 tons.
The LDZ-300 coal mine anchor rod tension meter consists of two parts: a hand pump and a tension cylinder. It has the characteristics of small size, light weight, easy carrying, simple operation, and safety. It is widely used in various roadway operations such as coal, national defense, tunnels, and transportation. Hand pumps can also be used as a separate power source for conveying small flow high-pressure oil, and tension cylinders can also be used as jacks.
LDZ-200 Anchor Rod Tension GaugePrecautions
The hydraulic oil used in this product is No.2 spindle oil (or No.20 mechanical oil), with a temperature range of -30 ℃ to+45 ℃. It is strictly prohibited to use alcohol, glycerin, brake oil, ordinary engine oil, etc. as hydraulic oil.
The rated pressure of this tool is 60MPa, and it should not exceed 70MPa during use. In addition, to improve the service life of the pressure gauge, the general pressure used should not exceed 60MPa.
The joint parts of the hand pump and tension cylinder of this tool are both subjected to a high pressure of 70MPa. Therefore, it is necessary to protect the joint and avoid damaging it, which may affect the sealing and normal operation. Also, do not use a wrench to tighten the joint buckle on the hose to prevent it from loosening and causing the hose to leak oil and be scrapped. After each use, tighten the dust cap and wipe the tool clean with clean cotton yarn.
The tool should be regularly cleaned with clean kerosene to ensure its proper functioning and extend the product's lifespan.
4. Attention: Do not block dirt on the inlet and outlet of each oil circuit.
AfterSalesService :
Key words:- Anchor rod tension meter for coal mines
More Products
