GR-18 mining sealed tank is easy to operate, fast, and the sealed material is easy to carry

Description :

Instructions for using RG-18 mining sealed tank

　　1. Operation steps

　　Open the packaging and take out the can, shake it thoroughly to mix the liquid thoroughly; Connect the spray gun hose to the tank valve and invert the tank; Open the valves of two tanks and spray with a handheld spray gun (when the spray gun hose is not long enough, you can hold the tank handle and use the spray gun to move and spray).

　　2. Operation method

　　Before spraying, ensure that the enclosed wall and surrounding areas have a good heat dissipation environment; When spraying, one layer should be sprayed from left to right, from top to bottom, and then back to the starting point. Repeat this process layer by layer evenly, extending the time interval to cover the previous layer as much as possible. It is strictly prohibited to spray too thick at once, and the thickness of each layer should not exceed 1 centimeter; After spraying, the site should be observed for more than 15 minutes to confirm that the reaction heat has dissipated before leaving.

Precautions

　　It is recommended to store at a temperature of 15-25 ℃, and the temperature should not exceed 35 ℃; The storage period under suitable temperature conditions is three months; If the storage temperature is below 15 ℃, it should be kept at a constant temperature of 15-25 ℃ 24 hours before use; When using, protective gloves and goggles should be worn. If they come into contact with the skin, rinse them off with clean water; If it comes into contact with the eyes, please rinse with plenty of water and seek medical attention; Under no circumstances should the gun be pointed at others or oneself.

AfterSalesService :

• Mining sealed tank