Daliuta 8 * 1 Mining Bundle Pipe is easy to use and can be customized with Mining Polyethylene Bundle Pipe

Description :

PE-ZKW8 * 1 bundle tubeInstallation instructions:

　　1. When polyethylene bundle pipes are installed vertically, they can be hung on thin steel ropes and fixed to steel frames or other pipelines with metal fixtures.

　　2. Polyethylene bundle pipes are strictly prohibited from being thrown and installed. After installation, a negative pressure gauge should be used at the end of the pipeline to check for leaks. If any abnormalities are found, they should be checked section by section.

　　3. CoalMining polyethylene bundle pipeEach metal hook, fixture, and pipe rack used for installation should be in close contact with the bundle tube, and the grounding effect should be tested after installation.

　　4PE-ZKW-8 * 1 Mining Bundle TubeBefore installation, please check the product markings of the polyethylene bundle tube core and outer sheath to see if they meet the usage requirements.

　　5. Before installing the polyethylene bundle pipe, high-pressure air (≤ 0.50mpa) should be used to remove dust inside the pipe, and an air compressor should be used for cleaning before connecting with the air circuit control cabinet.

PE-ZKW8 * 1 bundle tubeWhen installing horizontally, methods such as hanging and erecting are generally used. The hanging should be straight and neat, and the distance between each metal hook should not exceed 2 meters. It is advisable not to cross with cables and other pipelines as much as possible. Steel sleeves should be connected to protect pipelines passing through air doors and enclosed facilities,PE-ZKW-8 * 1 Mining Bundle TubeWhen the pipeline needs to be bent, the small bending diameter should be greater than 8 times the width of the bundle tube

AfterSalesService :

• Mining bundle tube