GL-5 Vehicle Gear Oil Manufacturer

Description :

　　GL-5 heavy-duty vehicle gear oilProduct advantages:

　　Due to the reduction of friction and wear, the service life of the equipment has been extended, and maintenance and production costs have been reduced;

　　Shorten the equipment running in period to achieve full load operation in the shortest possible time;

　　Extend the service life and oil change interval of lubricating oil, thereby reducing the consumption of lubricating oil and the cost of waste oil treatment;

　　Reduce friction coefficient, lower lubricating oil and component temperature, and improve operating efficiency to save energy;

　　Product refinement refers to simplifying and reducing the variety and quantity of lubricants, oils, and spare parts;

　　Reduce noise caused by high-frequency stick slip due to "lifetime" lubrication in certain applications;

　　Smooth out existing pitting corrosion;

　　Application scenarios

　　1. All types of industrial gears, especially those operating under extremely heavy loads that traditional extreme pressure lubricants cannot meet

　　2. Maintain long-term lubrication performance under extreme mechanical conditions, vibration, and high temperatures

　　3. Positive and bevel gears, as well as medium load worm gears

　　4. Gears (elevators, rolling mills, belt conveyors, extruders, vibrators, crushers, high-speed looms, and separators) subjected to high sliding friction and high Hertz surface pressure up to 2000 N/mm2

　　5. Eccentric wheel, camshaft, and planetary gear

　　6. Variable speed drive (PIV)

　　7. Sealed gear coupling

　　8. All types of bearings, especially spherical roller bearings, fully loaded cylindrical roller bearings, and thrust bearing circulation systems

　　GL-5 heavy-duty vehicle gear oil is a non solid additive gear oil containing micro rheological composite additives. Its design purpose is to reduce surface wear caused by tooth fatigue, pitting, peeling, scratching, scraping or unevenness during the running in period and normal operation. Microrheological technology additives can greatly improve the smoothness of friction surfaces, reaching a level that cannot be achieved with normal machining processes and traditional extreme pressure lubricants. On the friction surface, polarized composite additives can instantly form a passive film on the friction surface before friction occurs.

　　At a certain load level, additives can form a tough protective layer on the friction surface.

　　Under heavy load, the components of the composite additive are activated and diffuse beneath the surface, improving the friction characteristics of the friction surface through plastic deformation. Organic reaction products

　　The material becomes a part of the friction polymer system.

　　Unlike traditional lubricants, the friction polymer formed by MFT is a long-chain compound with good lubricity and adhesion, which improves the load-bearing area and makes the formed fluid dynamic lubricating film easier to maintain. This unique physical-chemical reaction belongs to the unique technology of Dedian, which can form a non consumable smooth friction surface.

　　Composite additive technology can provide first-class anti-wear protection and extremely low friction coefficient even under extreme pressure, vibration, impact load, high-speed or low-speed operation, or variable working conditions

　　Precautions for Diesel Engine Oil

　　During transportation, there must be clear markings to prevent confusion with other types of petroleum products.

　　The storage container must be dedicated and stored indoors or in a controlled climate environment as much as possible. The container must be waterproof, moisture-proof, and prevent mechanical impurities from entering.

　　According to the equipment oil regulations, suitable oil products with appropriate quality and viscosity levels should be selected. Mixing experiments should be conducted before mixing different brands of marine medium speed cylindrical piston diesel oil.

　　Before use, all containers, oil tanks, pipelines, valves, etc. should be carefully cleaned and inspected to prevent contamination.

　　Health and Safety

　　◆ Avoid long-term or repeated skin contact, prohibit consumption, and keep away from children.

　　Please protect the environment. Packaging and waste liquids should be handled by qualified units for centralized disposal. It is prohibited to pour them into drainage systems, water, and soil.

　　◆ For other health and safety information, please refer to the safety data sheet (MSDS) of the product.

　　Performance characteristics of diesel engine oil:

　　Good rust prevention performance, good alkali value retention, can effectively suppress the acidity generated by fuel combustion.

　　Good cleanliness and dispersibility, effectively preventing the formation of high-temperature carbon deposits and low-temperature sludge, keeping the engine clean, extending the safe operating cycle of equipment and the service life of spare parts.

　　Good antioxidant and thermal stability properties, reduce the oxidation rate of oil products, and extend the service life of oil products.

　　Good oil-water separation performance can quickly separate the moisture in the oil, avoid oil emulsification, and ensure the performance of oil use

　　Performance characteristics of diesel engine oil

　　Efficient cleaning ability, reducing carbon deposition, keeping the engine clean, and minimizing body wear

　　Adding high-performance anti-wear agents, with effective anti-wear ability, extending engine life

　　Excellent viscosity temperature performance, long-lasting viscosity retention ability, and minimal viscosity changes during use

　　Good alkali value retention ability, strong corrosion resistance, and excellent antioxidant capacity under high temperature and high load conditions

AfterSalesService :

• vehicle gear oil