High temperature hot water pump XR200-315 head
Category:
chemical industry/pump/centrifugal pump
Model:
XR200-315
Brand:
Zhongda water pump
Retail Price
52,000.00USD
重量
kg
- Product Description
-
Description :
Product Introduction
The XR type high-temperature hot water circulation pump is designed according to AP1610 and VDMA24297 (medium light/type) specifications. It is a substitute for the original R-type hot water circulation pump, with a high degree of standardization and universality. The pump has advanced performance, operates smoothly, and is safe and reliable. A new structure was adopted in the design and production. New materials.
Scope of application
Used for conveying high-pressure hot water with a temperature less than 280C ° C and no particles in industries such as metallurgy, power plants, rubber, chemical, heating, and waste heat utilization, with a heat exchange medium not exceeding 400C ° C.
main purpose
Refineries, petrochemical industry, coal processing industry, and low-temperature engineering.
Chemical industry, papermaking, pulp industry, sugar mills, and general process industry.
Water supply plant, seawater desalination plant, metallurgy.
Heating and air conditioning systems, power plants, environmental protection engineering, ships, and seawater industry, etc.
Using parameters
Caliber: 25-400mm
Flow rate (Q): 1.6-2600m3/h
Head (H): 5-300m
Speed: 1450/2900r/min?
Work pressure (P): up to 5MPa
Working temperature (T): Hot water ≤ 280C °; Heat exchange medium ≤ 400C °
Rotation direction: clockwise when viewed from the motor end.
Main component materials
Material Type
Medium water temperature
heat exchange
inlet pressure
Corrosion resistance capability
gray cast iron
≤150C°
/
≤1MPa
Not corrosion-resistant
cast steel
≤280C°
≤400C
≤5MPa
Not corrosion-resistant
stainless steel
≤280C°
≤400C
≤5MPa
corrosion resistance
Structural Description
The XR type hot water circulation pump is a single suction, single suction cantilever type, with horizontal axial suction and vertical upward discharge.
2. The radial part of the shell is particularly suitable for transporting high temperature, high pressure, flammable and explosive liquids, and its installation method is the horizontal center support of the pump body.
3. The suction and discharge flanges of the pump are cast on the pump body, while the shaft seal chamber and pump cover are integrated, with a water-cooled chamber jacket on the outside.
4. The bearing suspension body is cast with a large oil pool for bearing lubrication, and is equipped with a set of radial cylindrical bearings and a pair of back-to-back thrust ball bearings, which can withstand radial and axial forces.
Shaft seal form
temperature
Shaft seal form
T (water temperature) ≤ 180C °
Using carbon fiber fillers or mechanical seals
180C ° ≤ T (water temperature) ≤ 280C °
Adopting mechanical seal with cooler
T (heat exchange) ≤ 400C °
Support form of water pump
temperature
Support form of water pump
T (water temperature) ≤ 150C °
Using footboard support
Adopting bracket support with cooling system
150C ° ≤ T (water temperature) ≤ 280C °
T (heat exchange) ≤ 400C °
The difference between XR type hot water circulation pump and old-fashioned R-type hot water circulation pump is that XR type has a rear opening door structure, which is convenient for maintenance and disassembly.
Model Description
XR200-400B
XR: High temperature hot water circulation pump
200: Pump suction diameter (mm)
400: nominal diameter of impeller (mm)
B: The impeller undergoes secondary cutting
AfterSalesService :
Key words:- High temperature hot water pump
