Water pump ship factory

Description :

　　Product Introduction

　　The most traditional way to build pump stations in Rivers and Lakes or reservoirs is to build dams first, then drain the water in the area, build pump houses, and then install pumps, valves, pipelines, control systems, etc. Its characteristics: long construction period, large workload, high cost of pump room, and the higher the water level drop, the higher the cost of pump room; Traditional pump stations have their water intake fixed below the low water level, and the water source is the bottom layer source water with high sand content. The inlet pipe sinks deeper into the bottom of the water, wasting materials. If it is blocked by dirt, it is difficult to detect and clean it; The construction of pump stations has a significant impact on the environment and a low safety factor.

　　The design of the rocker arm type water intake pump ship breaks through the structural mode of traditional fixed pump stations, and combines modular floating boats designed using ship design theory and technology as carriers to form a water surface mobile pump station. It is a new type of equipment that can efficiently extract water without being limited by geographical environments such as water level fluctuations, riverbed movements, and high mountains.

　　The pump station is mainly composed of modular floating bodies, water intake systems, control systems, water transmission pipelines, and piers. The pump station has high stability, and the floating bodies meet the design concept of normal operation of the first compartment water inlet and non sinking of the third compartment water inlet pump station. The modular floating vessel is connected by assembly and combination, making production, transportation, and installation convenient and fast, and can meet the needs of various water intake sizes; The water intake system is based on the size of the water intake.

　　High and low head, adopting advanced vacuum self-priming method, consisting of energy-saving variable frequency high and low voltage motors matched with double suction centrifugal pumps; The ship's water supply pipeline system is connected to fixed supports using special structures such as flexible joints, universal joints, and rotary joints to ensure that the floating pump station can maintain pressure and operate normally even when the water level changes. The control system adopts intelligent design to achieve automated operation and remote control, with remote and local switching functions.

　　The main features of the rocker arm water intake pump ship are: the pump ship is connected to the shore based main water pipe, using a single steel pipe suspended connection. The steel pipe serves as the water delivery pipe and is equipped with a pedestrian passage. Suitable for water areas with steep riverbed slopes, currently the company has a span of 60 meters.

　　Structural characteristics of universal joint rocker arm connection pump station

　　The universal joint rocker arm connection structure pump station is equipped with universal joints at both ends of the water supply pipe. With the help of the universal joints, it can rotate freely to adapt to ship undulations, bumps, and swings. It has higher water pressure resistance and longer service life than rubber pipes.

　　1. Universal joint rocker arm connection structure pump station, rocker arm water supply pipe diameter ≤ 1200mm, ship anchoring positioning;

　　2. The water level drop is ≤ 20 meters, and the pedestrian bridge is directly installed on the rocker arm water supply pipe;

　　3. The water supply and pump head can be determined according to user requirements.

　　Characteristics of Type I structure of rotary joint rocker arm connection pump station

　　The rotary joint rocker arm connection structure pump station mainly relies on the rotary joint to connect with the rocker arm of the water supply pipe, and then forms a whole through the rotary seat installed on the floating body and the rotary seat of the shore support pier to achieve up and down rotation function.

　　A rotary joint is a connecting sealing device that inputs fluid medium from a stationary pipeline into rotating or reciprocating equipment, and then discharges it from the rotary joint. The product has many advantages such as compact structure, flexible rotation, zero leakage, and low maintenance, and is widely used in pump stations.

　　1. Rotary joint rocker arm connection structure pump station -, rocker arm water supply pipe diameter ≤ 1200mm, ship anchoring positioning;

　　2. The water level drop is ≤ 20 meters, and the pedestrian bridge is directly installed on the rocker arm water supply pipe;

　　3. The water supply and pump head can be determined according to user requirements.

　　Rotary joint rocker arm connection structure pump station type II

　　The rotary joint rocker arm connection structure pump station mainly relies on the rotary joint compensator to connect with the rocker arm of the water supply pipe, and then forms a whole through the rotary seat installed on the floating body and the rotary seat of the shore support pier to achieve up and down rotation function.

　　A rotary joint is a connecting sealing device that inputs fluid medium from a stationary pipeline into rotating or reciprocating equipment, and then discharges it from the rotary joint. The product has many advantages such as compact structure, flexible rotation, zero leakage, and low maintenance, and is widely used in petroleum, chemical, metallurgical, steel mills, power plants, ships, etc.

　　1. Rotary joint rocker arm connection structure pump station

　　2. The water level drop is ≤ 20 meters, and the pedestrian bridge is directly installed on the main rocker arm water supply pipe;

　　3. The water supply and pump head can be determined according to user requirements.

AfterSalesService :

• Water pump ship