Yueyang Sign Double Suspension Rod Processing Factory Heavy Contract Enterprise

Description :

　　Yueyang

　　The size of the signboard, whether it will be damaged by strong winds, and every detail are key to ensuring pedestrian safety. Therefore, we cannot be careless in the manufacturing of the signpost, and we must produce and install it scientifically

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Yueyang city, and we provide free technical guidance. Yueyang Road Traffic Sign Manufacturer, Yueyang Traffic Sign Production, Yueyang Road Sign Pole Processing, Yueyang Traffic Sign Pole, Yueyang Scenic Area Indication Sign Manufacturer, Yueyang Tourist Scenic Area Identification Sign Manufacturer, Yueyang Traffic Sign Production Manufacturer, Yueyang Traffic Sign Manufacturer, Yueyang Traffic Safety Sign Manufacturer, Yueyang Safety Warning Sign Manufacturer, Yueyang Traffic Sign Pole Customization, Yueyang Hot Dip Galvanized Traffic Sign Pole Manufacturer, Yueyang Multi pole Traffic Sign Pole, Yueyang Expressway Sign Sign Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Yueyang identification sign

　　Road traffic directional signs: usually rectangular, with blue (green) background, white text and white patterns, used to indicate the boundaries of towns and villages, the direction and distance of destinations, the entrance and exit of highways, service areas and locations, and to provide various directions along the way, such as national highway numbers, mileage markers, hundred meter stakes, boundary markers, directional signs, and signs for highways, gas stations, repair stations, parking lots, etc. Auxiliary signs are attached to the main signs to supplement the explanation, and can be divided into four types: indicating vehicle types, indicating time, indicating interval range and indicating distance. Auxiliary signs cannot be set up separately

　　Yueyang Sign Double Suspension Rod Processing Factory Heavy Contract Enterprise

　　The reflective material used in the design of the logo layout of the traffic highway sign manufacturer shall be Class IV (Grade) reflective film. The color of the ground road sign layout shall comply with the provisions of GB5768-2009. The shape and size of the layout graphics and symbols shall be further negotiated with the relevant departments of traffic management before implementation to meet the requirements of integrity and coordination

AfterSalesService :

• signage