Tongren Traffic Signage Company Road Signage Manufacturer Quotation Details

Description :

　　Tongren is widely used in highways, urban roads, and various types of roads

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Tongren city, and we provide free technical guidance. Tongren Road Traffic Sign Manufacturer, Tongren Traffic Sign Production, Tongren Road Sign Pole Processing, Tongren Traffic Sign Pole, Tongren Scenic Area Indicator Manufacturer, Tongren Tourist Scenic Area Sign, Tongren Traffic Sign Production Manufacturer, Tongren Traffic Sign Manufacturer, Tongren Traffic Safety Sign, Tongren Safety Warning Sign, Tongren Traffic Sign Pole Customization, Tongren Hot Dip Galvanized Traffic Sign Pole Manufacturer, Tongren Multi pole Traffic Sign Pole, Tongren Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Tongren Traffic Signage Company

　　So, what are the principles for setting up urban traffic road signs and road markings? According to the relevant road sign and road marking standards issued by the country, the main focus is on the setting of traffic road signs and markings. Traffic road signs and markings should be set according to road conditions, traffic flow conditions, traffic environment, the needs of road users, and the needs of traffic management. They should be coordinated with the surrounding facilities, environment, and landscape conditions. When the original traffic conditions or environment change, traffic signs and markings should be added, replaced, and updated in a timely manner

　　Tongren Traffic Signage Company Road Signage Manufacturer Quotation Details

　　The principle of setting up traffic safety signs is based on the design of out of town users who are not familiar with the local road conditions, fully considering the convenience of traffic participants and the improvement of road capacity, and comprehensively considering factors such as road facilities, transportation vehicles, traffic environment, and climate, to meet the traffic safety management needs of local roads in Shenzhen

AfterSalesService :

• Traffic Sign Identification Company